Acer Nitro 5 AN515-56-54EA Ram Upgrade.

Aglooka2

Hello all. I bought Nitro 5 AN515-56-54EA two weeks ago, and I see a lot of people buy another ram, so I want to put another 8gb of RAM. But I don't know what RAM to buy, as far as I have read, it should be 3200 MHZ but I dont know about timing.. I found a few Rams in my country even they are 3200 MHZ the timing is diffirent. So here are they:
1. TEAM GROIUP ELITE  3200 MHZ 22-22-22-52
2.Kingston Fury 3200 MHZ  CL 20
20-22-22
3. Kingston 3200 MHZ  CL 22  22-22-22
And here is screenshot. So which one should I buy? I think about 22 22 22 52, but I am not so familiar.

Thread was edited to add model name to the title

JackE

Due to the sensitivity of the 3200MHz RAM capable  mainboard bus, it is suggested that you try to match the specs of the DDR4 3200MHz sodimm module to those shown in the list below. The sodimms on this list have been shown to work with you new laptop.

Aglooka2

JackE said:

Due to the sensitivity of the 3200MHz RAM capable  mainboard bus, it is suggested that you try to match the specs of the DDR4 3200MHz sodimm module to those shown in the list below. The sodimms on this list have been shown to work with you new laptop.

I cant find this Ram in my country for sale, but I found that: 

KINGSTON DDR4 SDRAM, 8 GB, 3200MHz(PC4-25600) 

	KINGSTON
	8 GB
	DDR4 3200Mhz
	CL22
	1.2V
	SODIMM  Is that spec good for my laptop?

JackE

Yes, that seems like a close match. But before you buy, please go to this link and run the scanner on your machine to see what sodimms it recommends.

Aglooka2

JackE said:

Yes, that seems like a close match. But before you buy, please go to this link and run the scanner on your machine to see what sodimms it recommends.

Okay, but what about Timing? Should be the same or it can be lower? 

JackE

Did you run the scanner yet? CA latency seems to fit what's already in there. Should be OK.