im in the bios of my acer aspire 1 laptop that wont boot and there is no setting to change to legacy

Dom1234
Dom1234 Member Posts: 6

Tinkerer

its just not there all there is that i can see is secure boot and boot priority order with nothing under it.    this happened because my brother raged and hit were the hard drive is. if anybody can help please contact me.  Thanks. Sincerely. Dom   

Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Please post a phone photo of the BIOS information tab instead.

    Jack E/NJ

  • Dom1234
    Dom1234 Member Posts: 6

    Tinkerer

    edited August 2021






     here you go 

    Edited to hide sensitive information
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    The HDD is still recognized by the BIOS. Go back into the BIOS and press F9 to load BIOS defaults. Then press F10 to save default settings and exit. The BIOS must remain in UEFI mode. The HDD won't be recognized in Legacy mode.

    Jack E/NJ

  • Dom1234
    Dom1234 Member Posts: 6

    Tinkerer

    ok i did it what now

  • Dom1234
    Dom1234 Member Posts: 6

    Tinkerer

     it still says no bootable device 
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Go back into the BIOS menu Main tab. Make sure the F12 and D2D options are enabled. Then press F10 to save settings and exit. Then shut the machine off again. Then turn it back on and immediately press the ALT key while tapping the F10 key. Does a recovery screen appear?

    Jack E/NJ

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Go back into the BIOS menu Main tab. Make sure the F12 and D2D options are enabled. Then press F10 to save settings and exit. Then shut the machine off again. Then turn it back on and immediately press the ALT key while tapping the F10 key. Does a recovery screen appear?

    Jack E/NJ

  • Erick-Acer_Retired
    Erick-Acer_Retired Member Posts: 503 Seasoned Practitioner WiFi Icon
    Hi @Dom1234
    Could you please tell me full model name of device