orion 5000 i did change my AIO to 360mm but the system is not identfying the pump?

Sam24

AIO is Icue H150i from corsair and i did change the case as well.
but where is USB in the motherboard 
if somebody could halp me weth it I will realy appreiateit.
by the way i have orion 5000 615a and the motherboard is z49h5-am

Easwar

Hi Sam24,

# Try to get the BIOS page.

1. Turn OFF the unit.

​2. Press and hold the F2 key and turn on the unit. 
3. You will be in setup utility page. 
4. Once you got the screen release the F2 key.
5. Tap on F9 key and hit enter key without changing the option.
6. Tap on F10 key and hit enter key without changing the option.
7. Your unit will restart by itself. 

Check this T/S and post the result. ​

Sam24

it did't work but thanks for your comment. Easwar said:

Hi Sam24,

# Try to get the BIOS page.

1. Turn OFF the unit.

​2. Press and hold the F2 key and turn on the unit. 
3. You will be in setup utility page. 
4. Once you got the screen release the F2 key.
5. Tap on F9 key and hit enter key without changing the option.
6. Tap on F10 key and hit enter key without changing the option.
7. Your unit will restart by itself. 

Check this T/S and post the result. ​

i did try evreything now am thingeing t swap motherboard.

billsey

I am guessing your model is a PO5-615s. Here is the MB layout:

The USB headers are #16 (3.2 gen 1) and #17 (2.0). The rest of the USBs are on the back and already exposed.