Will the N156HHE-GA2 120Hz 30 pin screen be compatible with my AN 515-52 (744J)?

Nero1192
Nero1192 Member Posts: 9

Tinkerer

Since most videos on youtube or even comments on Acer community have mentions of GA1 and this is GA2
https://www.amazon.ae/WYAN-COMPUTERPART-N156HHE-GA2-Resolution-Screens/dp/B08KW5X58D/ref=sr_1_3?dchild=1&keywords=15.6+120hz+screen&qid=1624135135&sr=8-3

Answers

  • StevenGen
    StevenGen ACE Posts: 12,065 Trailblazer
    edited June 2021
    Nero1192 said:
    The pins are different on the high gamut GA1 and GA2 screens. These are the specs suggested by Acer for your AN515-52 which is an LED 15.6” screen, keep to these specs, unelss you want to modefy the connector of the GA1 and GA2 to fit this laptop.

    The OEM AN515-52 LED has the following spes:
    • Screen Diagonal (mm) 394.87 mm (FHD), 
    • Active Area (mm) 344.16 x 193.59 mm (FHD), 
    • Display resolution (pixels) 1920 x 1080 (FHD), 
    • Pixel Pitch (mm) 0.17925 mm x 0.17925 mm (FHD), 
    • Typical White Luminance (cd/m2) also called Brightness at 220 cd/m2.
    Vendor/Model name:
    Slim, eDP, FHD, IPS
    N156HCE-EAA
    • LP156WF6-SPK6
    • B156HAN06.1 H:2A
    • B156HAN06.0 H:5A
    • NV156FHM-N43 V8.0

    Note: The GA1 and GA2 type screens of the 15.6" 120HZ IPS Screen refresh rate for the AN515-52 is the N156HCE-EAA fitting the N156HHE-GA1 or the N156HHE-GA2 are screens especial for gamers and these products are equipped with a narrow 30-pin connector, so if your existing screen is a standard 30-pin connector, it will not fit. The screen is a HIGH gamut LCD. If your existing LCD is a standard gamut LCD, you will encounter many issues when trying to upgrade it to high gamut type.


    SCREENARAMA New Screen Replacement for N156HCE-EAA, FHD 1920x1080, IPS, Glossy, LCD LED