NVIDIA 3070 TI Graphics Card and Changing Power Supply - nitro 50 N50-610-UR14

savory

I was able to get a 3070 Ti graphics card and would like to swap out my 1650 card that was pre-installed. I purchased the acer nitro 50 Model Name: N50-610-UR14

I'm looking to get the following power supply for the graphics card:
EVGA - BR Series 700W ATX12V /EPS12V 80 Plus Power Supply DC-DC Technology - Black
OR
EVGA - W1 Series 600W ATX 12V/EPS 12V 80 Plus Power Supply - Black
NVIDIA GeForce RTX 3070 Ti

I measured the power supply unit and it seems like either of these would work. The dimensions for the supply is 5.5 (length) x 5.9 (width) x 3.4 (height). Would these power supplies be sufficient since the card recommends 600 W PSU?

//Edited the content to add model name.

DoorlessRyan

savory said:

I was able to get a 3070 Ti graphics card and would like to swap out my 1650 card that was pre-installed. I purchased the acer nitro 50 Model Name: N50-610-UR14

I'm looking to get the following power supply for the graphics card:
EVGA - BR Series 700W ATX12V /EPS12V 80 Plus Power Supply DC-DC Technology - Black
OR
EVGA - W1 Series 600W ATX 12V/EPS 12V 80 Plus Power Supply - Black
NVIDIA GeForce RTX 3070 Ti

I measured the power supply unit and it seems like either of these would work. The dimensions for the supply is 5.5 (length) x 5.9 (width) x 3.4 (height). Would these power supplies be sufficient since the card recommends 600 W PSU?

//Edited the content to add model name.

Hello, I'm also upgrading my nitro n50-610 to a 3070ti in the same way as you soon, If there are any problems you came across could you let me know? 

Thank you! 

Ryan