Back cover is stuck on on acer aspire 7750g

SebastianTudoran
SebastianTudoran Member Posts: 4 New User
So I wanted to upgrade the ssd and so I took off the back cover put in the ssd and when I put it back on I forgot to put the rails so I went to unscrewing until I found out a screw on the back plate was missing and is rattling inside and I can’t that the back plate off any help?

Best Answer

  • SebastianTudoran
    SebastianTudoran Member Posts: 4 New User
    Answer ✓
    Never mind I managed to get it off with wedging a screwdriver I would delete the post by now but I don’t know how to 

Answers

  • SebastianTudoran
    SebastianTudoran Member Posts: 4 New User
    Answer ✓
    Never mind I managed to get it off with wedging a screwdriver I would delete the post by now but I don’t know how to 
  • JackE
    JackE ACE Posts: 45,092 Trailblazer
    Make sure you got all the screws out and use the tab. Use a credit card as a wedge to help lift the door off. And I'd advise against using rails and more screws as it's crowded enough inside laptopss. Instead, use a bit of foam  to immobilize and protect the SSD. Jack E/NJ




    Jack E/NJ

  • JackE
    JackE ACE Posts: 45,092 Trailblazer
    Good for you. Jack E/NJ

    Jack E/NJ

This discussion has been closed.