K272HUL Flickering

Member Posts: 3 New User
My K272HUL shows random lines (they cannot really be noticed) on the screen for a bit and then goes black for 2-3 seconds. A temporary fix is to push the DP cable in from the computer, and they soon start to flicker again. My graphics card is GTX 1660 Ti

Best Answer

  • Member Posts: 3 New User
    Answer ✓
    Yeah, I figured out that the DP was bent.

Answers

  • Jack22
    Jack22 ACE Posts: 4,164 Pathfinder
    Unplug all the wires goes to the back of the monitor and press and hold the power button for 30 seconds and than connect all cables and check. still if you have issue than change the cables or it should be the problem with the port on the monitor
    Click on 'Yes' if the comment answers your question!
  • Member Posts: 3 New User
    Do I have to keep the power cable on the first option? And can it be that I switch the cable ends with each other.
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi,

    It may be issue with HDMI or VGA cable. Check is there any damages on the cables.
  • Member Posts: 3 New User
    Answer ✓
    Yeah, I figured out that the DP was bent.
This discussion has been closed.