my acer nitro 5 has stopped working and says no bootable device can anyone help?

holie_snipes
holie_snipes Member Posts: 3 New User
my acer nitro 5 boots to bios where i can see the name of the drive and thats its running sata but it lists no information on the size of the drive ive tried just about everything i know the drive works and i have reinstalled windows on the drive reset cmoss unplugged the drive and plugged it back in and i have made sure that the sata connecter on the board has a good connection and have still not found a fix for what is happening if you have any information on how i may fix this please send it my way

Answers

  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    @holie_snipes
    Try the below step and check

    BIOS default: power on the unit, but as soon as you power on the unit keep pressing the F2 key so that it take you to BIOS page. Press F9 and press Enter than press F10 and press Enter. the unit will restart​
    Click on 'Yes' if the comment answers your question!
  • holie_snipes
    holie_snipes Member Posts: 3 New User
    Jack22 said:
    @holie_snipes
    Try the below step and check

    BIOS default: power on the unit, but as soon as you power on the unit keep pressing the F2 key so that it take you to BIOS page. Press F9 and press Enter than press F10 and press Enter. the unit will restart​
    I tried this but it didnt seems to do anything i have tried many different options like changing it from sata to achi but nothing seems to help i would love to see any more information you have on this topic

  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    @holie_snipes
    Than there are chances that it might be the hard drive issue, try the alt+F10 while turning on the laptop to do a reset
    Click on 'Yes' if the comment answers your question!
  • christy1
    christy1 Member Posts: 1,619 Community Aficionado WiFi Icon
    my acer nitro 5 boots to bios where i can see the name of the drive and thats its running sata but it lists no information on the size of the drive ive tried just about everything i know the drive works and i have reinstalled windows on the drive reset cmoss unplugged the drive and plugged it back in and i have made sure that the sata connecter on the board has a good connection and have still not found a fix for what is happening if you have any information on how i may fix this please send it my way

    If even after bios default if its not booting then it can be a hardware issue.  The ssd might have gone bad. Contact acer support or try a new ssd.
    https://www.acer.com/worldwide/support/
    Accept if its Helpful.   B)