Acer Aspire A315-54. Screen flickers, but doesn't show anything except a black screen.

Hi, I have an Acer Aspire A315-54
One of the problems, I'm having is that my screen on my acer doesn't turn on or show any display.

I already did the hard reset with the battery pin and that doesn't seem to work.
Drivers are updated.
Used an external display and everything seem to be running fine on the second screen.

Upon powering on, there is a slight flick on my screen, but it remains as a black screen.

I'm not too experienced with these stuff, hope yall can help me identify this problem.

SNID: XXXX
BIOS Vers: V1.04
Windows 10
Intel(R) UHD Graphics.

Much appreciated - Trueless.

Edited the content to hide sensitive information

Accepted answers

All comments

christy1

Trueless
Try to go to bios during the startup of the unit and check on that screen if its still flickering on that screen. press f2 to go to bios. press f9 ->press enter, press f10->press enter. check after the restart.

Image result for bios

Trueless

christy1

Followed your instructions and the screen didn't restore back to normal.
Upon power up, I could see a light flicking behind the screen for like 1-3 seconds, but not the actual screen itself if that make sense.

Trueless

christy1
Followed your instruction and remains the same.

George-Acer_Retired

Hi Trueless,

Are you getting abnormal screen in BIOS page also.

christy1

Trueless said:

christy1

Followed your instructions and the screen didn't restore back to normal.
Upon power up, I could see a light flicking behind the screen for like 1-3 seconds, but not the actual screen itself if that make sense.