I wanna know if I can upgrade my aspire a514-52g memory card

Alexou2003

I currently have a x600 sata m.2 2280 ssd from sandisk and I wanna know if it will still work if I but a Seagate Barracuda 510 ssd (M.2 PCIe NVMe 3d Tlc nand cause the Seagate Barracuda 510 is not base on sata

JackE

Yes, the 510 m.2 nvme should also be compatible with your m.2 socket since your mainboard supports both SATA3 and nvme cards. Jack E/NJ .   

Alexou2003

Will the motherboard support it cause the seagate barracuda is way faster the the sandisk I currently have a speed of 540 mo/sec but the barracuda have a speed of 3400 mo/sec

Alexou2003

JackE said:

Yes, the 510 m.2 nvme should also be compatible with your m.2 socket since your mainboard supports both SATA3 and nvme cards. Jack E/NJ .   

Will the motherboard support it cause the seagate barracuda is way faster the the sandisk I currently have a speed of 540 mo/sec but the barracuda have a speed of 3400 mo/sec

JackE

Yes. the PCIe bus should support NVMe Gen 3 cards with speeds 2400 MB/s or higher. Should be 4 times faster than SATA3 cards. Jack E/NJ

Alexou2003

JackE said:

Yes. the PCIe bus should support NVMe Gen 3 cards with speeds 2400 MB/s or higher. Should be 4 times faster than SATA3 cards. Jack E/NJ

It won't become hot?

JackE

The 510 uses 2.5 watts. The x600 2.2 watts. Not too much difference. A little warmer maybe but not hot. Jack E/NJ

Alexou2003

JackE said:

The 510 uses 2.5 watts. The x600 2.2 watts. Not too much difference. A little warmer maybe but not hot. Jack E/NJ

Thank you
Also I was thinking if I can add a other ssd size I have a place for it in my pc I wonder what I would need for that

JackE

You can request an ACER 2.5" HDD/SSD drive mounting kit at this link     I however prefer to use antistatic foam to immobilize and protect the drive inside my laptops instead of adding more brackets &screws. It's crowded enough inside without adding more metal.    Jack E/NJ

https://csapps.acer.com/kit-request/#submit