How do i enable XMP to overclock my RAM PH315-52

Ansh2236
Ansh2236 Member Posts: 32 Troubleshooter
edited November 2023 in 2020 Archives
My Laptop Model is PH315-52
RAM is 16GB DDR4 single channel 
there is no such options in BIOS to enable XMP (BIOS is INSYDE H20 V1.2) 

Best Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,588 Trailblazer
    Answer ✓
    Hi,
    Go to NVIDIA Control panel, click "Manage 3D settings", and select "High Performance NVIDIA Processor" with the dropdown arrow in the right pane, click Apply to save the setting, then move to "Set PhysX Configuration" and select NVIDIA card in the right pane, as for the memory, you can buy another 16GB DDR4 2666MHz module and install but don't mix JEDEC profile RAM(which is already in your laptop) with a XMP RAM like HyperX, if you prefer HyperX modules, buy two of them and install, sell the RAM module already in the laptop.


  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder
    Answer ✓
    Sorry i meant the ram on the others has been replaced! It looks like yours is runing quite well and most things are at or way above expectations which is really good! Im woondering if the syntetic load is better run with dual channel but thats just a guess 

    Keep in mind that sometimes people fiddle with tings outside of control as well such as replacing the thermal paste, using cooling pads and things like that, im a tad suspicous that the CPU on the others is in the 92th perentile. it looks like you laptop is performing really really well,

Answers

This discussion has been closed.