Need help for 946GZT Motherboard jumpers

I2JJR

Good afternoon,

I am still using, for specific particular use, an old AcerPowerFH having 946GZT-AM Motherboard and an added video card for HDMI out.

I needed to replace the video card, added time ago, because of a connector issue, but I am not able to find how to set the video out to the original internal video, as it was when I bought it.

At boot it immediately beeps as it does not find some hardware, (I suppose the video card) and I am not able to enter set up anyway, nor has it any video output on the motherboard VGA connector.

I remember that there should be a jumper to set to select internal or card video out, but I do not remember what where and do not find any documentation anymore.

Any help on this matter will be very appreciated, this ooold PC is still running XP os, that I need for a particular application, not working with any other OS.

Many thanks, again, and wishes for a merry Christmass and a quiet, better and sound new year.

Greetings, August I2JJR

billsey

That is a real oldie, vintage Vista IIRC. Here is what I have, you should remove the write protect for the CMOS then reset it to defaults, then put the jumpers back to normal. That should have you back to using the motherboard video: