predator g9 593 created raid 0 accidently!! please help
pritesh123
Member Posts: 11
Tinkerer
i have a predator g9 593,what has happened is using the intel rst i accidently created raid 0 with my ssd(128gb) and hdd(1tb) ,i reinstalled windows by deleting ssd raid partition using windows installer!
but the raid still exist as after deleting the partition the storage became 238gb previously it was 119! as i cant change raid 0 to ahci from bios ,i tried to disconnect hdd ,but while installing windows it was showing no disk to install windows on!
now i have completely reinstalled windows but sadly sata is still raid 0!
but the raid still exist as after deleting the partition the storage became 238gb previously it was 119! as i cant change raid 0 to ahci from bios ,i tried to disconnect hdd ,but while installing windows it was showing no disk to install windows on!
now i have completely reinstalled windows but sadly sata is still raid 0!
0
Best Answers
-
Have fixed the issue so kindly close the thread!0
-
You said above its been resolved, are the two still in raid0?
One easy way if just remove one of the drives, install, which will wipe the raid config, then place the other drive, format and it should work0
Answers
-
Have fixed the issue so kindly close the thread!0
-
come on guyss!! help me!!!!0
-
You said above its been resolved, are the two still in raid0?
One easy way if just remove one of the drives, install, which will wipe the raid config, then place the other drive, format and it should work0 -
Did the same thing as you mentioned and yes it worked!!! Thanks!!1
-
Don't forget to grab the drivers from the Acer site if it didn't auto install , glad it worked👍0
