ACER NITRO 5( AN515-43 ) LAGS IN EVERY GAME PLEASE HELP!

NGZEUS
NGZEUS Member Posts: 300 Mr. Fixit WiFi Icon
edited November 2023 in 2020 Archives
HELLO THERE MY ACER NITRO 5 ( AN-515-43) LAGS IN EVERY GAME PLEASE HELP 
IF YOU THINK I HAVE ANSWER YOUR QUESTION PLEASE CLICK YES :)

Best Answer

  • GAMING6698
    GAMING6698 ACE Posts: 7,740 Pathfinder
    edited December 2020 Answer ✓
    @NGZEUS
    You need to do it yourself steps are very easy to open your laptop and cleaning fans, air vents, applying new thermal paste.
    I just did it last month (and result was my max cpu temperature 77°C and GPU 67°C max, every day I play games for 3-4hrs non stop and temperature didn't even reaches to 80°C)

    I am providing all steps below if you think you can do it then that's great otherwise send it to service but you need to paid because you are not under warranty.

    Solution-
    Things you need -
    1)correct tools to open laptop screws
    2)you should buy best quality thermal paste name "thermal grizzly kryonaut" or "Arctic MX-4 2019 edition"
    3)Buy isopropyl alcohol 70%+ to remove old thermal paste 
    4) use dry cloth(Moisten the cloth with isopropyl alcohol, then rub the chip & sink with the wet cloth. Don't apply the solvent directly on chip because it'll spill over on the board)

    If you want best temperature while gaming then follow these steps one by one-
    (opening back cover is really hard so be careful, you can watch some youtube videos also)

    First you need to clean laptop fans and air vents before applying new thermal paste 
    Follow this video-
    https://youtu.be/uB39PPoHBpo
    After cleaning fans, air vents don't assamble heat sink/cooling system.
    First remove old thermal paste from both GPU/CPU chips and from heat sink.
    After removing old thermal paste you should apply new thermal paste on both chips(use spread ing method)
    Now, assamble your cooling system/heat sink after applying thermal paste
    You can see spreading method from below video-
    https://youtu.be/LHOBRvXYqEg
    Note- After assambling don't open heat sink again, if open then you will introduce air pockets when putting it back on because the way the paste was separated. This causes trouble when dissipating heat and can possibly damage your CPU.
    windows 10/11 optimization guide for gaming 
    Windows 10/11 optimization guide for gaming — Acer Community

    My AN515-43 laptop UserBenchmark-
    https://www.userbenchmark.com/UserRun/51514566
«1345678

Answers