Boot priority order empty (on SWIFT 3 - SF315-51)

System
System Member Posts: 4,562 Seasoned Practitioner WiFi Icon
edited November 2023 in 2020 Archives
This discussion was created from comments split from: Boot priority order empty (on SWIFT 3 - SF315-51).

Answers

  • Ratnesh
    Ratnesh Member Posts: 1 New User
    Mr_Ron said:

    still i am not able to boot from pen drive.

    boot manager not showing any bootable device in list. (bootable pen drive inserted)


    there is empty priority order.



    please give some solution for this.....
    I am caring this problem so long.
    I am facing same issue, how does it got resolved

  • GLH78
    GLH78 Member Posts: 9 New User
    edited October 2020
    Hi there.

    Thanks for having relaunched the subject.
    I'm still stuck with the three following screens :

    SCREEN 1: DARK SCREEN WITH ONLY THE MESSAGE : No Bootable Device 

    After Power off and On + F2 
    Disk 1 & 2 are visible in the bios :



    Then, Screen 3 : Boot menu is totally empty



    I m desesperated.
  • JackE
    JackE ACE Posts: 45,088 Trailblazer
    Turn machine off. Turn it back on and immediately press and hold the ALT key while tapping the F10 key. A recovery screen should appear to let your refresh the system. Jack E/NJ

    Jack E/NJ

  • JackE
    JackE ACE Posts: 45,088 Trailblazer
    Stay on this thread, your original thread, with your original username. I can't keep track of different usernames if you used another one since your response to my Mar 17th post didn't appear until today.

    Something seems to have wiped your boot drive of its GPT partitioning as if Legacy BIOS mode had been enabled at some point. The BIOS must be in UEFI mode. I suggest that you go to this link, click on Win10 and use the Microsoft USB media creation tool to make a bootable Win10 USB installation pendrive. http://www.microsoft.com/en-us/software-recovery

    With the machine off, insert the Win10 USB installation pendrive. Then turn the machine on. The machine should boot from the Win10 USB pendrive to allow you to install Win10 or perhaps will give you an option to repair the  boot drive inside your machine.

    Jack E/NJ



    Jack E/NJ

  • Sambol
    Sambol Member Posts: 6 New User
    I tried the same way, but the entire day it keeps moving from windows and acer logo at which point i can disconnect usb drive and is there any key need press for next step? 
     
  • Sambol
    Sambol Member Posts: 6 New User

    next screen is like, after sometime it will black screen then same acer logo. Do I need remove USB stick when it comes to black screen?
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    You have to leave the flash drive in. You are booting and running from it. You may have to use the F12 menu to select the flash drive for booting though.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.