Thermal pads - PH315-51

busu3

I recently repasted my PH315-51 with kryonaut. My gpu is still reaching 75'C on max fans. I think it is because of the thermal pads. What specifications of thermal pads should I buy for the VRAMs?

pulkitking24

i am using one with 6.0 W/mk but i you have good budget go with something higher or buy arctic thermal pad. good luck

pulkitking24

0.5 mm for vram to replace that pink thermal past type thing. for other part you need 1.0 mm

busu3

pulkitking24 said:

0.5 mm for vram to replace that pink thermal past type thing. for other part you need 1.0 mm

OK thanks. What should be the conductivity?

pulkitking24

i am using one with 6.0 W/mk but i you have good budget go with something higher or buy arctic thermal pad. good luck

busu3

Ok thanks.

Boeing7479M

pulkitking24 said:

0.5 mm for vram to replace that pink thermal past type thing. for other part you need 1.0 mm

Hi, sorry for bringing up an old topic, but isn't pink thermal paste thing something on the 2019 model? PH315-51 is a 2018 model which has different cooling heatpipe layout and doesn't come with that pink paste.

I have the exact same model as the OP's (PH315-51 [2018]) and just recently repasted, and replaced the VRAM thermal pads with new and facing exactly the same problem. Would the OP @busu3 be able to update if 0.5mm thickness thermal pad solved the problem?

busu3

Boeing7479M said:

pulkitking24 said:

0.5 mm for vram to replace that pink thermal past type thing. for other part you need 1.0 mm

Hi, sorry for bringing up an old topic, but isn't pink thermal paste thing something on the 2019 model? PH315-51 is a 2018 model which has different cooling heatpipe layout and doesn't come with that pink paste.

I have the exact same model as the OP's (PH315-51 [2018]) and just recently repasted, and replaced the VRAM thermal pads with new and facing exactly the same problem. Would the OP @busu3 be able to update if 0.5mm thickness thermal pad solved the problem?

I used 1.5 mm initially and there was 0 contact with the die then 0.5 mm is what works the best. 1mm doesn't spread the paste out completely.

Boeing7479M

@busu3 thanks for the response. I'm getting some 0.5mm pads now.

also, what kind of temperatures are you getting for both CPU & GPU with the 0.5mm pads now?

busu3

I raise the back by 3 inches and put fans on max. Gpu average 99-100% usage and cpu at about 50% average: Gpu temps are max 67 average 64, Cpu temps are max 79 and average 71. Under stress tests, cpu goes to 83-85 and the gpu stays at about 72(both cpu and gpu 100% usage). All temps in celsius.

Boeing7479M

busu3 said:

Boeing7479M said:

pulkitking24 said:

0.5 mm for vram to replace that pink thermal past type thing. for other part you need 1.0 mm

Hi, sorry for bringing up an old topic, but isn't pink thermal paste thing something on the 2019 model? PH315-51 is a 2018 model which has different cooling heatpipe layout and doesn't come with that pink paste.

I have the exact same model as the OP's (PH315-51 [2018]) and just recently repasted, and replaced the VRAM thermal pads with new and facing exactly the same problem. Would the OP @busu3 be able to update if 0.5mm thickness thermal pad solved the problem?

I used 1.5 mm initially and there was 0 contact with the die then 0.5 mm is what works the best. 1mm doesn't spread the paste out completely.

Well noted, thanks! I'm going to order some 0.5mm pads now.