i3 2nd gen to i5 2nd gen

Mystudio12
Mystudio12 Member Posts: 2 New User
edited November 2023 in 2020 Archives
Hi
I'm hoping someone out their Can answer this question.
I have a
Gateway Dx4860 UB32 p / Acer motherboard 
i3 2120 CPU /w H67 Chip set 
16 gb ram 
I have purchased an i5 2550k CPU 2nd gen and would like to install it.
is it necessary to upgrade the bios to the latest version or will it run without , being its a 2nd gen CPU

Thanks

 

Best Answer

  • IVAN_PC
    IVAN_PC ACE Posts: 7,579 Pathfinder
    Answer ✓
    Hi,

    It is always advisable to have the latest BIOS version, but this processor is compatible with the 1155 chipset.

    At first you should recognize it ,without updating BIOS.

    Regards.

    ☑️ 𝑺𝒊 𝒆𝒔𝒕𝒂 𝒆𝒔 "𝒍𝒂 𝒓𝒆𝒔𝒑𝒖𝒆𝒔𝒕𝒂", 𝒉𝒂𝒛 𝒄𝒍𝒊𝒄 𝒆𝒏 "𝑨𝒄𝒆𝒑𝒕𝒂𝒓 𝒍𝒂 𝒔𝒐𝒍𝒖𝒄𝒊ó𝒏" 𝒑𝒂𝒓𝒂 𝒂𝒚𝒖𝒅𝒂𝒓 𝒂 𝒐𝒕𝒓𝒐𝒔 𝒂 𝒆𝒏𝒄𝒐𝒏𝒕𝒓𝒂𝒓𝒍𝒂.
    ☑️ 𝑬𝒍 𝒇𝒐𝒓𝒐 𝑨𝑪𝑬𝑹 𝒄𝒐𝒎𝒎𝒖𝒏𝒊𝒕𝒚 𝒕𝒊𝒆𝒏𝒆 𝒖𝒏 𝒂𝒎𝒃𝒊𝒆𝒏𝒕𝒆 𝒂𝒈𝒓𝒂𝒅𝒂𝒃𝒍𝒆 𝒅𝒐𝒏𝒅𝒆 𝒕𝒐𝒅𝒐 𝒆𝒍 𝒎𝒖𝒏𝒅𝒐 𝒆𝒔 𝒃𝒊𝒆𝒏𝒗𝒆𝒏𝒊𝒅𝒐.

Answers

  • IVAN_PC
    IVAN_PC ACE Posts: 7,579 Pathfinder
    Answer ✓
    Hi,

    It is always advisable to have the latest BIOS version, but this processor is compatible with the 1155 chipset.

    At first you should recognize it ,without updating BIOS.

    Regards.

    ☑️ 𝑺𝒊 𝒆𝒔𝒕𝒂 𝒆𝒔 "𝒍𝒂 𝒓𝒆𝒔𝒑𝒖𝒆𝒔𝒕𝒂", 𝒉𝒂𝒛 𝒄𝒍𝒊𝒄 𝒆𝒏 "𝑨𝒄𝒆𝒑𝒕𝒂𝒓 𝒍𝒂 𝒔𝒐𝒍𝒖𝒄𝒊ó𝒏" 𝒑𝒂𝒓𝒂 𝒂𝒚𝒖𝒅𝒂𝒓 𝒂 𝒐𝒕𝒓𝒐𝒔 𝒂 𝒆𝒏𝒄𝒐𝒏𝒕𝒓𝒂𝒓𝒍𝒂.
    ☑️ 𝑬𝒍 𝒇𝒐𝒓𝒐 𝑨𝑪𝑬𝑹 𝒄𝒐𝒎𝒎𝒖𝒏𝒊𝒕𝒚 𝒕𝒊𝒆𝒏𝒆 𝒖𝒏 𝒂𝒎𝒃𝒊𝒆𝒏𝒕𝒆 𝒂𝒈𝒓𝒂𝒅𝒂𝒃𝒍𝒆 𝒅𝒐𝒏𝒅𝒆 𝒕𝒐𝒅𝒐 𝒆𝒍 𝒎𝒖𝒏𝒅𝒐 𝒆𝒔 𝒃𝒊𝒆𝒏𝒗𝒆𝒏𝒊𝒅𝒐.
  • Mystudio12
    Mystudio12 Member Posts: 2 New User
    Thanks for answering my Question. I tried to find this on the internet and at Gateway site, But Gateway is not very helpful. 
    I'm trying to rebuild this computer to update my music studio in which i was still using an old XP computer. i'm hoping it will be powerful enough to run the new programs and interface. If I can get it up to snuff, I may have to bit the Bullitt and get a new one. any suggestions would be greatly appreciated
    thanks again