AC100 No beep,No post etc

zolee001
zolee001 Member Posts: 2 New User
edited March 1 in 2020 Archives
Greetings!
Acer Ac100 (original hardware,Xeon cpu,8GB Ram)  working well until tonight
Power off and power on but no beep,no post,fan working leds are green  (lan led is blinkg) but hdd led and hdd status  leds no light.
Cpu death or MB death?
Any ideas?
Thanks

Answers

  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    Could be either, and not too likely to be something else. When first powered on the hardware initializes the CPU, then uses the CPU to start the POST. If the CPU is bad POST won't happen and you won't get POST diagnostic beeps or video. If the CPU is good but the MB is bad, so CPU can't be initialized, you get the same symptoms... :(
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.