Case opening: Acer Veriton N4630G

BenJamesS
BenJamesS Member Posts: 3 New User
edited March 2024 in 2020 Archives
I would like replace the drive with SSD. I can not work out how to open the case. There are clips on youtube for what is listed as the same model, and looks very similar, however the case is different. I can only see one screw, even after the side is clipped off. Wold be very grateful for images or video.

Best Answer

  • billsey
    billsey ACE Posts: 34,869 Trailblazer
    Answer ✓
    OK, it looks like yours doesn't have either expansion box 1 or 2. Here's what you need, the key is the cover and front bezel slide forward...

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • billsey
    billsey ACE Posts: 34,869 Trailblazer
    They have a couple of different configurations on these and the procedure is different between them, but I believe the key is that you have to take the stand off first. There should be one screw holding it on and it will just pull away. Next step means I have to know which expansion box is attached. Can you take pictures for me?
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • BenJamesS
    BenJamesS Member Posts: 3 New User
    Thank you very much Billsey.
     
  • billsey
    billsey ACE Posts: 34,869 Trailblazer
    Answer ✓
    OK, it looks like yours doesn't have either expansion box 1 or 2. Here's what you need, the key is the cover and front bezel slide forward...

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • BenJamesS
    BenJamesS Member Posts: 3 New User
    Got it! thanks Billsey. Was still struggling until I attached a vga cable to have something to hold on to and pulled from that 
  • billsey
    billsey ACE Posts: 34,869 Trailblazer
    Heheh, leverage is sometimes everything. :)
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.