Replace Optical Drive in G6-720?

Options
vogelap
vogelap Member Posts: 2 New User
edited February 15 in 2020 Archives
I'd like to replace the optical drive in my G6-720 with a Blu-Ray Burner. I've taken the back off, unscrewed 4 screws, and removed the side panels. But I need to remove the front as well. I see 6 black plastic clips (3 per side), but the front still seems to be attached. What do I need to do to remove the front?

Best Answers

  • philetus
    philetus ACE Posts: 4,759 Pathfinder
    Answer ✓
    Options
    If you took out the correct screws, it should slide out, unless someone put a screw in the other side. some Remove the other side cover and check.



  • laurent_14
    laurent_14 ACE Posts: 10,082 Trailblazer
    Answer ✓
    Options
    Hello,
    Follow these steps to remove the front bezel:

    France

Answers

  • philetus
    philetus ACE Posts: 4,759 Pathfinder
    Answer ✓
    Options
    If you took out the correct screws, it should slide out, unless someone put a screw in the other side. some Remove the other side cover and check.



  • laurent_14
    laurent_14 ACE Posts: 10,082 Trailblazer
    Answer ✓
    Options
    Hello,
    Follow these steps to remove the front bezel:

    France
  • vogelap
    vogelap Member Posts: 2 New User
    edited June 2020
    Options
    Thank you for your helpful answer! That answers my questions! Can you direct me to the document from which that info was taken, please? I'd like to have a copy of that here.

    Thanks again.
  • philetus
    philetus ACE Posts: 4,759 Pathfinder
    Options
    Sorry, I can not do that. It was taken from an Acer Factory service manual that is not available to the general public.