Acer nitro 5 an515-54 repaste didnt help

Panda

Hi all. I am new here and my english is not very well sorry about that.i have Acer nitro 5 laptop temps reach 95(CPU) 86(gpu) i change thermal paste mx-4 Fırat but nothing change after that i decided to use coolermaster master gel maker Nano i applied it but nothing change.
Finally temps are still high pls help me 

Specs
1660ti
9750h 
16gb 2666ram

StevenGen

I would suggest that you always use a good laptop tablet cooler e.g. like the TopMate C5 Laptop Cooler, KLIM Wing Laptop Cooler, like I do, as my laptop also overheated but I've also done the bottom case mods. The bottom case mod(s) is a method of adding extra vent(s) holes into the bottom case, which I would not recommend unless your laptop is out of warranty and/or you have the expertise, experience to do this type of a mod.

Make sure also, that the CPU/GPU fans are clean and working 100%, also use the "Thermal Grizzly Conductonaut" liquid metal thermal compound, which is the best and is designed for applications that require Ultra-high thermal conductivity, Increased indium content with best heat dissipation.

Note: with "Repasting" you never want to apply too much paste to the CPU/GPU, did you do that? The best method is the “Pea Size Dot” method, which is placing a dot size paste in the middle of the CPU/GPU and placing the CPU/GPU on top and after fixing the heatsink, you don’t need too much to spread evenly across the chip as you fit the CPU/GPU cooler on top and you don't want any overflow.

Panda

StevenGen said:

I would suggest that you always use a good laptop tablet cooler e.g. like the TopMate C5 Laptop Cooler, KLIM Wing Laptop Cooler, like I do, as my laptop also overheated but I've also done the bottom case mods. The bottom case mod(s) is a method of adding extra vent(s) holes into the bottom case, which I would not recommend unless your laptop is out of warranty and/or you have the expertise, experience to do this type of a mod.

Make sure also, that the CPU/GPU fans are clean and working 100%, also use the "Thermal Grizzly Conductonaut" liquid metal thermal compound, which is the best and is designed for applications that require Ultra-high thermal conductivity, Increased indium content with best heat dissipation.

Note: with "Repasting" you never want to apply too much paste to the CPU/GPU, did you do that? The best method is the “Pea Size Dot” method, which is placing a dot size paste in the middle of the CPU/GPU and placing the CPU/GPU on top and after fixing the heatsink, you don’t need too much to spread evenly across the chip as you fit the CPU/GPU cooler on top and you don't want any overflow.

Thanks for answer

First i have no cooler but i will buy in this week.
My old laptop different brand i applied this thermal paste and difference was 12 -15 degree i think heatsink type maybe the issue but i dont know
I did what you say i applied top much or little or pie size dot i dissambled 4 or 5 times but nothing changed.Also my fans are working at full 6000rpm.
 İ didnt try liquid metal i dont know how can i use it