I have 3GB RAM issue on my Aspire 5735 (Bios 1.07).

System
System Member Posts: 4,569 Seasoned Practitioner WiFi Icon
edited October 2023 in 2020 Archives
This discussion was created from comments split from: Acer Aspire 5735Z/5735.

Answers

  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    Hi there!
    I have 3GB RAM issue on my Aspire 5735 (Bios 1.07). As mentioned in this forum it should be updated to 1.10.
    FTP link requires authentication (anonymous - doesn't work) :'(
    Can anybody recommend alternative download link or share guest credentials for FTP, please?

    Thanks in advance.
  • JackE
    JackE ACE Posts: 45,211 Trailblazer
    What problem are you trying to fix by changing the BIOS from version 1.07? Jack E/NJ

    Jack E/NJ

  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    JackE said:
    What problem are you trying to fix by changing the BIOS from version 1.07? Jack E/NJ

    3GB limitation
  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    IronFly said:

    Unfortunately, this link requires logn and password ((((
    Does anybody know the credentials for this ftp? r might-be alternative link...

    I have the same issue with RAM on Aspire 5735, so I need this version of BIOS...
     
  • JackE
    JackE ACE Posts: 45,211 Trailblazer
    You don't need to change the BIOS for 4GB maximum. Your machine is dual channel capable. So It requires a matched pair of DDR2 of 667MHz or higher frequency 2GB modules for 4GB maximum RAM.  https://www.crucial.com/compatible-upgrade-for/acer/aspire-5735

    Jack E/NJ


    Jack E/NJ

  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    I suppose, I found the solution of 3G RAM issue! B)
    This a BIOS - just update it using bios downloaded from official support site!
    It works in my case!
    I had 3GB RAM limitation on my Aspire 5735 (Bios 1.07), only 3 GB were accessible from installed 4 GB (2 x 2GB).
    If you lazy go here: https://www.acer.com/ac/en/ID/content/support-product/556?b=1
    Download BIOS (it is V.1.08), unpack and run the utility.
    It is relay simple! =)

    Now I can install something better then died Win XP! :p


  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    IronFly said:

    Unfortunately, this link requires logn and password ((((
    Does anybody know the credentials for this ftp? r might-be alternative link...

    I have the same issue with RAM on Aspire 5735, so I need this version of BIOS...
     
    JackE said:
    What problem are you trying to fix by changing the BIOS from version 1.07? Jack E/NJ

    Please read my comment - I installed 2x2G DDRII RAM modules (identical), and BIOS sees only 3GB from 4 GB. As was mentioned before on this forum (the same on several other internet resources) this issue can be fixed by upgrading BIOS to V 1.10.
    Please assist.
  • JackE
    JackE ACE Posts: 45,211 Trailblazer
    >>>>It works in my case!>>>Download BIOS (it is V.1.08), unpack and run the utility.>>>It is relay simple!>>>
    >>> I installed 2x2G DDRII RAM modules (identical), and BIOS sees only 3GB from 4 GB.>>>

    These two statements conflict. Does it work? Or doesn't it work?

    How are you determining the BIOS only sees 3GB? If you're using msinfo32, about 3GB is what you should see as available out of the total 4GB installed. The rest is being used by the operating system to boot your machine. Jack E/NJ


    Jack E/NJ

  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    JackE said:
    >>>>It works in my case!>>>Download BIOS (it is V.1.08), unpack and run the utility.>>>It is relay simple!>>>
    >>> I installed 2x2G DDRII RAM modules (identical), and BIOS sees only 3GB from 4 GB.>>>

    These two statements conflict. Does it work? Or doesn't it work?

    How are you determining the BIOS only sees 3GB? If you're using msinfo32, about 3GB is what you should see as available out of the total 4GB installed. The rest is being used by the operating system to boot your machine. Jack E/NJ


    War is not finished ((((
    I installed 2 DDRII-666 x 2 GB. Before update both: BIOS (on POST screen) and OS (Windows7 in my computer properties) showed 3 GB. After updating to official 8-th version - BIOS shows 4GB (on POST screen), OS shows 4 GB, but available only 3 GB.
    Memtest86 correctly shows both DRRs in slots, but available for test only 3 GB (((.

    So, I suppose, (and it was said in the beginning) BIOS should be updated to 10th version...
    Unfortunately official FTP for now requires authentication ((((
    Can you please assist?
  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    Proxyma said:
    I suppose, I found the solution of 3G RAM issue! B)
    This a BIOS - just update it using bios downloaded from official support site!
    It works in my case!
    I had 3GB RAM limitation on my Aspire 5735 (Bios 1.07), only 3 GB were accessible from installed 4 GB (2 x 2GB).
    If you lazy go here: https://www.acer.com/ac/en/ID/content/support-product/556?b=1
    Download BIOS (it is V.1.08), unpack and run the utility.
    It is relay simple! =)

    Now I can install something better then died Win XP! :p



    Unfortunately, it is ok  only on BIOS POST screen ((((, neither Windows7 nor Memtest86 can't reach more then 3GB...
    I suppose it is necessary to find 10th version of the BIOS (1.10)
  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    JackE said:
    You don't need to change the BIOS for 4GB maximum. Your machine is dual channel capable. So It requires a matched pair of DDR2 of 667MHz or higher frequency 2GB modules for 4GB maximum RAM.  https://www.crucial.com/compatible-upgrade-for/acer/aspire-5735

    Jack E/NJ


    It is possible to buy another used notebook for the same price...
  • Proxyma
    Proxyma Member Posts: 9

    Tinkerer

    Proxyma said:
    Proxyma said:
    I suppose, I found the solution of 3G RAM issue! B)
    This a BIOS - just update it using bios downloaded from official support site!
    It works in my case!
    I had 3GB RAM limitation on my Aspire 5735 (Bios 1.07), only 3 GB were accessible from installed 4 GB (2 x 2GB).
    If you lazy go here: https://www.acer.com/ac/en/ID/content/support-product/556?b=1
    Download BIOS (it is V.1.08), unpack and run the utility.
    It is relay simple! =)

    Now I can install something better then died Win XP! :p



    Unfortunately, it is ok  only on BIOS POST screen ((((, neither Windows7 nor Memtest86 can't reach more then 3GB...
    I suppose it is necessary to find 10th version of the BIOS (1.10)

    Proxyma said:
    JackE said:
    >>>>It works in my case!>>>Download BIOS (it is V.1.08), unpack and run the utility.>>>It is relay simple!>>>
    >>> I installed 2x2G DDRII RAM modules (identical), and BIOS sees only 3GB from 4 GB.>>>

    These two statements conflict. Does it work? Or doesn't it work?

    How are you determining the BIOS only sees 3GB? If you're using msinfo32, about 3GB is what you should see as available out of the total 4GB installed. The rest is being used by the operating system to boot your machine. Jack E/NJ


    War is not finished ((((
    I installed 2 DDRII-666 x 2 GB. Before update both: BIOS (on POST screen) and OS (Windows7 in my computer properties) showed 3 GB. After updating to official 8-th version - BIOS shows 4GB (on POST screen), OS shows 4 GB, but available only 3 GB.
    Memtest86 correctly shows both DRRs in slots, but available for test only 3 GB (((.

    So, I suppose, (and it was said in the beginning) BIOS should be updated to 10th version...
    Unfortunately official FTP for now requires authentication ((((
    Can you please assist?

    IT IS NOT ONLY MY ISSUE (https://community.acer.com/en/discussion/462630/acer-aspire-5735z-5735/)

  • JackE
    JackE ACE Posts: 45,211 Trailblazer
    Run 'msinfo32.exe'. In the right pane, you should see 4GB physical memory of which about 3GB should be available. The other 1GB is used by Win7 operating system. Jack E/NJ

    Jack E/NJ