Blue screen issue

System

This discussion was created from comments split from: Factory reset on acer aspire 5733z-4851 without reset disc.

LMFM1

ACER ASPIRE 5733Z-4851 model (KERNEL SECURITY CHECK FAILURE) Blue  Screen

I have tried various fixes from web sites with no success. I've formatted a Seagate 1TB hard drive (Windows 10) using another ACER ASPIRE laptop and afterward booted from it and it works fine. Once I install that disk on the ASPIRE 5733Z-4851 I get the Windows Blue Logo , Please Wait Message and then I get the Kernel Security Check Failure message. I have changed via F2 Function Key the boot sequence trying to use a Flash Drive (SanDisk) from which I formatted the hard drive and still can get the laptop to recognized it. 
The Kernel Security Check Failure can be caused by the installed software conflicts. In addition to that, if your computer has memory problems, virus infection, driver incompatibility or outdated issue, corrupted Windows system files and hard disk errors, you can get the stop code Kernel Security Check Failure.24 dic. 2019

My take from the above info from a web site, is that if the new hard drive runs OK on another ACER ASPIRE laptop, except for the MEMORY PROBLEMS, the other errors are not possible to cause the BLUE SCREEN ( caused by the installed software conflicts, virus infection, driver incompatibility or outdated issue, corrupted Windows system files and hard disk errors.
I don't know if the BIOS could be causing this problem or a MEMORY chip. 
Thanks in advance for your support and guidance, truly appreciated

LMFM1

Additional information for ACER ASPIRE 5733Z-4851 model (KERNEL SECURITY CHECK FAILURE) Blue  Screen

Model: ACER ASPIRE 5733Z-4851

BIOS: Version V1.04

INTEL V1994

MEMORY: 8GB DDR3L - 1600 SODIMM 1.35V CL11

CRUCIAL by MICRON (CT102464BF160B . C16FPD)

HD:SEAGATE Laptop SSHD 1TB

LMFM1

ACER ASPIRE 5733Z-4851 model (KERNEL SECURITY CHECK FAILURE) Blue  Screen

I have tried various fixes from web sites with no success. I've formatted a Seagate 1TB hard drive (Windows 10) using another ACER ASPIRE laptop and afterward booted from it and it works fine. Once I install that disk on the ASPIRE 5733Z-4851 I get the Windows Blue Logo , Please Wait Message and then I get the Kernel Security Check Failure message. I have changed via F2 Function Key the boot sequence trying to use a Flash Drive (SanDisk) from which I formatted the hard drive and still can get the laptop to recognized it. 

The Kernel Security Check Failure can be caused by the installed software conflicts. In addition to that, if your computer has memory problems, virus infection, driver incompatibility or outdated issue, corrupted Windows system files and hard disk errors, you can get the stop code Kernel Security Check Failure.24 dic. 2019

My take from the above info from a web site, is that if the new hard drive runs OK on another ACER ASPIRE laptop, except for the MEMORY PROBLEMS, the other errors are not possible to cause the BLUE SCREEN ( caused by the installed software conflicts, virus infection, driver incompatibility or outdated issue, corrupted Windows system files and hard disk errors.

I don't know if the BIOS could be causing this problem or a MEMORY chip.

 
Thanks in advance for your support and guidance, truly appreciated

LMFM1

Additional information for ACER ASPIRE 5733Z-4851 model (KERNEL SECURITY CHECK FAILURE) Blue  Screen

Model: ACER ASPIRE 5733Z-4851

BIOS: Version V1.04

INTEL V1994

MEMORY: 8GB DDR3L - 1600 SODIMM 1.35V CL11

CRUCIAL by MICRON (CT102464BF160B . C16FPD)

HD:SEAGATE Laptop SSHD 1TB

billsey

Was the Aspire you used to install Windows 10 on the HDD the same model as the 5733Z? If not you likely have incorrect drivers on the OS install, and they are what's causing the blue screen. Why not install W10 directly on the laptop?