Acer Aspire7 A715-72G - Wifi AX200 Bluetooth not working

Big2830
Big2830 Member Posts: 3 New User
I use Aspire7 A715-72G. When i changed my wifi card to AX200 with newest driver from intel both Wifi and Bluetooth.

The wifi works GREAT.
But it can't find BLUETOOTH... ( can't find in Device manager ) ( no hidden )

1) No problem with the card because i try this card with PCIe on the desktop. and it's Work.

Thank you so much for the answer.

Best Answer

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,457 Trailblazer
    Hi,
    Go to Settings, Devices and check whether Bluetooth is switched on.

  • Big2830
    Big2830 Member Posts: 3 New User
    Answer ✓
    There is nothing.. I found some posts have to seal 2 pins on card .. But i dont' want to hack them . So Any idea
    https://community.acer.com/en/discussion/549994/intel-9260ngw-bluetooth

    But i dont' want to hack them . So Any idea



  • JackE
    JackE ACE Posts: 44,870 Trailblazer
    It can't hurt to try scotch taping the two contacts. Nothing lost if it doesn't work. BT gained if it does. Jack E/NJ

    Jack E/NJ

  • Big2830
    Big2830 Member Posts: 3 New User
    Dear JackE

    I'm not sure that it will have any affect to mainboard or batteries ? or not.. No one update yet.. 
  • JackE
    JackE ACE Posts: 44,870 Trailblazer
    If it were mine, I'd try the scotch tape without hesitation since so many users seem to have reported success for different systems. Like most hardware mods made to a factory system as you've done with this card, no one here on these forums can give you a 100% guarantee that there won't be any side effects.  You just have to decide to try it or keep looking for a software solution that may or may not have its own side effects. Jack E/NJ

    Jack E/NJ

  • Thyv3n
    Thyv3n Member Posts: 11

    Tinkerer

    Big2830 said:
    There is nothing.. I found some posts have to seal 2 pins on card .. But i dont' want to hack them . So Any idea
    https://community.acer.com/en/discussion/549994/intel-9260ngw-bluetooth

    But i dont' want to hack them . So Any idea



    Meu amigo!!! Segui o procedimento !!! Problema resolvido e caso encerrado!!!
    Coloquei uma fita adesiva nos 2 contatos mencionados e agora Wifi e Bluetooth 5.2 estão funcionando perfeitamente...
    My friend, I followed the procedure!!!
    I placed I scotch tape over the 2 contacts like mentioned on the other discussion... Problem Solved!!!!
    Now, wifi and bluetooth are working perfectly!!!

  • JackE
    JackE ACE Posts: 44,870 Trailblazer
    Thanks for reporting on your success. Jack E/NJ

    Jack E/NJ