120hz+ Screen Upgrade - Nitro 5 17.3" - AN517-51-56YW

ohfoxy
ohfoxy Member Posts: 17 Troubleshooter
edited November 2023 in 2020 Archives
Can anyone recommend a replacement screen model for my AN517-51-56YW that is 120hz or above?  I have found numerous 15.6" displays which are 120hz+ and 30-pin, but from what I understand the 17.3" model which I own is also 30-pin, and I can only find 17.3" screens that are either 60hz 30-pin, or 120hz+ 40-pin.  I will keep looking but if anyone has any recommendations it would save me a lot of headache!  I don't care whether its LCD or IPS, my Nitro 5 is my secondary gaming machine so screen quality isn't nearly as important as refresh rate.

Thanks so much!

Edit: and forgive my ignorance but I am primarily experienced with working on desktop machines - is there any way to reconfigure (swap out ribbon cable, etc.) to use a 40-pin screen, or better yet a G-Sync screen?  I would assume the answer is no, because the motherboard probably lacks the appropriate connector, but I figured I would ask!

Best Answer

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,589 Trailblazer
    edited March 2020 Answer ✓
    Hi,
    I could find only 144Hz compatible panels and couldn't find any 120Hz panels, you have to buy a new eDP cable for the 40 pin panel, I think you are aware that the panels are secured by double sided tapes and not with screws, in any case, I have attached a video showing the removal procedure on a 15.6" model.
    Panels: B173HAN04.0
               N173HCE-G33
    Part number for eDP cable:50.Q5EN2.010
    http://www.panelook.com/modelcompare.php?ids=37192,37006
    https://www.youtube.com/watch?v=2RQMAYA2-eQ

  • ohfoxy
    ohfoxy Member Posts: 17 Troubleshooter
    edited March 2020
    Hi,
    I could find only 144Hz compatible panels and couldn't find any 120Hz panels, you have to buy a new eDP cable for the 40 pin panel, I think you are aware that the panels are secured by double sided tapes and not with screws, in any case, I have attached a video showing the removal procedure on a 15.6" model.
    Panels: B173HAN04.0
               N173HCE-G33
    Part number for eDP cable:50.Q5EN2.010
    http://www.panelook.com/modelcompare.php?ids=37192,37006
    https://www.youtube.com/watch?v=2RQMAYA2-eQ

    Awesome, I appreciate the information!!!  So to make sure I am understanding you correctly, the connector on the motherboard of my laptop that current has a 30-pin eDP cable connected will indeed be able to accept a 40-pin eDP cable?  I started to wonder if the reason that 17" displays with these specs don't seem to exist in 30-pin is related to maximum throughput of 30-pin cables not being sufficient.

    With regard to G-Sync, on a desktop PC, the G-Sync module is build into the monitor, so the only hardware requirement is a GPU which is G-Sync compatible - does it work the same way on a laptop?  Or is the G-Sync module something that would be part of the motherboard.  I just don't want to buy a G-Sync panel only to determine that my laptop is not capable of utilizing it.

    Thank you!!!
  • ohfoxy
    ohfoxy Member Posts: 17 Troubleshooter
    edited March 2020
    Mirsal said:
    XXXX

    Edited the thread to hide sensitive information
    Acer-Samuel
    Umm... everything okay over there? lol
  • ohfoxy
    ohfoxy Member Posts: 17 Troubleshooter
    edited March 2020
    Edit: somehow my message posted twice with one click D:
  • andylb
    andylb ACE Posts: 3,827 Pathfinder
    edited March 2020
    ohfoxy said:
    Mirsal said:
    01123314687
    Umm... everything okay over there? lol
    it was spam, it’s removed now

    Please click YES if I answered your question

    I am not an ACER employee
    Thank you and have a blessed day  B)

    ★★ ACE Pathfinder 2019★★

  • brummyfan2
    brummyfan2 ACE Posts: 28,589 Trailblazer
    edited March 2020
    ohfoxy said:
    Hi,
    I could find only 144Hz compatible panels and couldn't find any 120Hz panels, you have to buy a new eDP cable for the 40 pin panel, I think you are aware that the panels are secured by double sided tapes and not with screws, in any case, I have attached a video showing the removal procedure on a 15.6" model.
    Panels: B173HAN04.0
               N173HCE-G33
    Part number for eDP cable:50.Q5EN2.010
    http://www.panelook.com/modelcompare.php?ids=37192,37006
    https://www.youtube.com/watch?v=2RQMAYA2-eQ

    Awesome, I appreciate the information!!!  So to make sure I am understanding you correctly, the connector on the motherboard of my laptop that current has a 30-pin eDP cable connected will indeed be able to accept a 40-pin eDP cable?  I started to wonder if the reason that 17" displays with these specs don't seem to exist in 30-pin is related to maximum throughput of 30-pin cables not being sufficient.

    With regard to G-Sync, on a desktop PC, the G-Sync module is build into the monitor, so the only hardware requirement is a GPU which is G-Sync compatible - does it work the same way on a laptop?  Or is the G-Sync module something that would be part of the motherboard.  I just don't want to buy a G-Sync panel only to determine that my laptop is not capable of utilizing it.

    Thank you!!!
    Hi,
    No problem, yes the connector on the motherboard is compatible with 30pin and 40 pin panels, as for the G-sync query, I couldn't find any information about G-sync in the manual, N173HCE-G33 has mentioned that G-sync as a feature and being one of the original part installed by Acer I think the model is capable of G-sync, I would suggest you to wait for someone else who is more familiar with it to shed some light on this matter.
  • ohfoxy
    ohfoxy Member Posts: 17 Troubleshooter
    ohfoxy said:
    Hi,
    I could find only 144Hz compatible panels and couldn't find any 120Hz panels, you have to buy a new eDP cable for the 40 pin panel, I think you are aware that the panels are secured by double sided tapes and not with screws, in any case, I have attached a video showing the removal procedure on a 15.6" model.
    Panels: B173HAN04.0
               N173HCE-G33
    Part number for eDP cable:50.Q5EN2.010
    http://www.panelook.com/modelcompare.php?ids=37192,37006
    https://www.youtube.com/watch?v=2RQMAYA2-eQ

    Awesome, I appreciate the information!!!  So to make sure I am understanding you correctly, the connector on the motherboard of my laptop that current has a 30-pin eDP cable connected will indeed be able to accept a 40-pin eDP cable?  I started to wonder if the reason that 17" displays with these specs don't seem to exist in 30-pin is related to maximum throughput of 30-pin cables not being sufficient.

    With regard to G-Sync, on a desktop PC, the G-Sync module is build into the monitor, so the only hardware requirement is a GPU which is G-Sync compatible - does it work the same way on a laptop?  Or is the G-Sync module something that would be part of the motherboard.  I just don't want to buy a G-Sync panel only to determine that my laptop is not capable of utilizing it.

    Thank you!!!
    Hi,
    No problem, yes the connector on the motherboard is compatible with 30pin and 40 pin panels, as for the G-sync query, I couldn't find any information about G-sync in the manual, N173HCE-G33 has mentioned that G-sync as a feature and being one of the original part installed by Acer I think the model is capable of G-sync, I would suggest you to wait for someone else who is more familiar with it to shed some light on this matter.
    Alright thank you. I am going to leave this thread unanswered for now to see if I can get more information on the G-Sync compatibility of the 60hz Nitro 5 AN517-51 but I will mark your answer as the accepted answer once I've given it some time.  I appreciate your help!
  • brummyfan2
    brummyfan2 ACE Posts: 28,589 Trailblazer
    ohfoxy said:
    ohfoxy said:
    Hi,
    I could find only 144Hz compatible panels and couldn't find any 120Hz panels, you have to buy a new eDP cable for the 40 pin panel, I think you are aware that the panels are secured by double sided tapes and not with screws, in any case, I have attached a video showing the removal procedure on a 15.6" model.
    Panels: B173HAN04.0
               N173HCE-G33
    Part number for eDP cable:50.Q5EN2.010
    http://www.panelook.com/modelcompare.php?ids=37192,37006
    https://www.youtube.com/watch?v=2RQMAYA2-eQ

    Awesome, I appreciate the information!!!  So to make sure I am understanding you correctly, the connector on the motherboard of my laptop that current has a 30-pin eDP cable connected will indeed be able to accept a 40-pin eDP cable?  I started to wonder if the reason that 17" displays with these specs don't seem to exist in 30-pin is related to maximum throughput of 30-pin cables not being sufficient.

    With regard to G-Sync, on a desktop PC, the G-Sync module is build into the monitor, so the only hardware requirement is a GPU which is G-Sync compatible - does it work the same way on a laptop?  Or is the G-Sync module something that would be part of the motherboard.  I just don't want to buy a G-Sync panel only to determine that my laptop is not capable of utilizing it.

    Thank you!!!
    Hi,
    No problem, yes the connector on the motherboard is compatible with 30pin and 40 pin panels, as for the G-sync query, I couldn't find any information about G-sync in the manual, N173HCE-G33 has mentioned that G-sync as a feature and being one of the original part installed by Acer I think the model is capable of G-sync, I would suggest you to wait for someone else who is more familiar with it to shed some light on this matter.
    Alright thank you. I am going to leave this thread unanswered for now to see if I can get more information on the G-Sync compatibility of the 60hz Nitro 5 AN517-51 but I will mark your answer as the accepted answer once I've given it some time.  I appreciate your help!
    No problem  :)
  • YoYoPa
    YoYoPa Member Posts: 1 New User
    ohfoxy said:
    ohfoxy said:
    Hi,
    I could find only 144Hz compatible panels and couldn't find any 120Hz panels, you have to buy a new eDP cable for the 40 pin panel, I think you are aware that the panels are secured by double sided tapes and not with screws, in any case, I have attached a video showing the removal procedure on a 15.6" model.
    Panels: B173HAN04.0
               N173HCE-G33
    Part number for eDP cable:50.Q5EN2.010
    http://www.panelook.com/modelcompare.php?ids=37192,37006
    https://www.youtube.com/watch?v=2RQMAYA2-eQ

    Awesome, I appreciate the information!!!  So to make sure I am understanding you correctly, the connector on the motherboard of my laptop that current has a 30-pin eDP cable connected will indeed be able to accept a 40-pin eDP cable?  I started to wonder if the reason that 17" displays with these specs don't seem to exist in 30-pin is related to maximum throughput of 30-pin cables not being sufficient.

    With regard to G-Sync, on a desktop PC, the G-Sync module is build into the monitor, so the only hardware requirement is a GPU which is G-Sync compatible - does it work the same way on a laptop?  Or is the G-Sync module something that would be part of the motherboard.  I just don't want to buy a G-Sync panel only to determine that my laptop is not capable of utilizing it.

    Thank you!!!
    Hi,
    No problem, yes the connector on the motherboard is compatible with 30pin and 40 pin panels, as for the G-sync query, I couldn't find any information about G-sync in the manual, N173HCE-G33 has mentioned that G-sync as a feature and being one of the original part installed by Acer I think the model is capable of G-sync, I would suggest you to wait for someone else who is more familiar with it to shed some light on this matter.
    Alright thank you. I am going to leave this thread unanswered for now to see if I can get more information on the G-Sync compatibility of the 60hz Nitro 5 AN517-51 but I will mark your answer as the accepted answer once I've given it some time.  I appreciate your help!
    Hey, did you ever figure out how to/if it's possible to upgrade the screen?
  • Kalival
    Kalival Member Posts: 10 New User
    Did you manage to upgrade to 144hz ?
  • Ashbuilt
    Ashbuilt Member Posts: 1 New User
    Hi guys/Girls

    I have upgraded my acer nitro 5 17.3 screen from a 60hz to 144hz
    check out my youtube video showing and telling you how I did it. Also if you don't mind as a thanks give me a subscribe ;)

    https://www.youtube.com/watch?v=c4rw8yNbfSo&ab_channel=AshBuilt