Bios does not recognice bootable USB drives

Kapuchinz
Kapuchinz Member Posts: 2 New User
edited November 2023 in 2020 Archives
Here are pictures of my BIOS


Hitting F12 while booting still only shows Windows Boot Manager

Holding down shift while restarting and choosing boot from USB say no device found.


Answers

  • What is your computer model and what operating system are you trying to install? Have you already converted the pendrive to gpt and formatted it in fat32?
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Kapuchinz
    Kapuchinz Member Posts: 2 New User
    PH315-52-78VL Helios 300, trying to install Ubuntu, I used Rufus for gpt and fat32 and ntfs
  • It is important to note that linux has some problems with the rst with optane mode. It is possible to configure it to accept this mode. However, the fastest method is to activate ahci mode. To do this, enter windows and press windows + r. Then type msconfig and at startup, enable secure boot. Then go to the bios and change the sata mode to ahci and press f10 to save on exit.
    After you have made this change correctly, check that windows boots correctly, disabling safe boot.
    To configure the pendrive, open cmd as an administrator and run these commands:

    Then extract the x64 iso to the root of the USB stick. Also check if the flash drive appears, when activating the function f12 boot menu.
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :)