About unlocking the GTX 1050 3GB equipped Nitro 5 2019 model (AN515-54W2) variant to full 1050 Ti
First off has anyone removed the heatsink from the GPU itself and checked there's no missing VRAM module? FYI the full fat 1050 Ti runs on 128 bit wide memory bus and thus has four 1GB GDDR5 modules. In our case the fully activated GP107 chip similar to the 1050 Ti rather than the cutdown 1050 with it's 768 shaders but is running on narrower 96 bits wide memory bus accompanied by three 1GB GDDR5 modules and the remaining 1GB module seemingly disabled or nonexistent depending on your specific unit. If we're lucky to have the memory module intact then it's only a matter of flashing custom VBIOS to fully activate it and turn it into a 1050 Ti which will retain the lost 25% bandwidth and VRAM capacity assuming the ROP partition can also be activated by the custom VBIOS which in turn gives quite noticeable performance improvement especially on memory hog games IMO. If anyone is up for such experiment or just found my idea interesting please leave your opinion in here.