Switch Alpha 12 says No Bootable device Please help me with

Degroot
Degroot Member Posts: 1 New User
edited November 2023 in 2020 Archives
Hi there, First my Aces Switch was in a boot loop modus. Than I tried Alt F10.. after that it was showing No bootable Device. Can somebody please HELP ME out!! 

Answers

  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    Sure, you are going to want to put together a Windows 10 install flash drive so you can get into diagnostics mode, then from the command prompt run DISKPART to look at the hidden partitions on the drive. From there it's feasible to repair broken UEFI settings to get you booting again, unless the SSD has completely failed.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • igawron
    igawron Member Posts: 1 New User
    Hi!
    1. Enter the setup menu (F2 key after restart)
    2. Check the Boot tab. In Boot Mode set system boot mode to UEFI.
    3. F10 key- save configuration .....- click Yes
    4. Enter the setup menu again (F2 key after restart).
    5. In Boot tab boot priority order set  "windows boot manager" on the first place
    6. F10 key- save configuration .....- click Yes.
    It helped in my case.