HELP : Wont turn on PH315-51 after replacing Drive

Dandan0404
Dandan0404 Member Posts: 4 New User
edited November 2023 in 2019 Archives
Situation: Replaced SSD and SSHD to hdd. when i press on, it wont turn on. When charged orange light, lights up/turn on(signaling its charged). That cancel outs grounding. Reinserted battery and ram, pressed on and nothing happens. Immediatly left and after a minute it boots up(barebones/bottom panel not yet fully screwed). Managed to install windows 10, went to desktop shutdown. Closed everything and turned on and it wont boot. Went to service center and said the keyboard is the problem. I cant find fix for keyboard pins or anything online. Need help or other suggestion for what is wrong.

TL;DR replaced drives with old hdd. Doesnt turn on, luck happened and installed windows 10. Turned off and screwed back together. It doesnt turn on anymore.

1)Orange indicator lights up- removing idea of grounded/grounding.
2) it turned on once-removing idea of fail display and hdd.

SPECS: i7 8th gen 1060, 8gb ram. PH315-51 2018 HELIOS 300.

i hope someone can help , you are free to ask for questions or amything.

Answers

  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    Sounds like maybe you didn't get a cable quite routed right when reassembling, such that when fully assembled it pulls slightly out of connector...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.