My laptop, the Acer Aspire M5-583P, pops up a message every time it boots up

KyleIsWeird
KyleIsWeird Member Posts: 1 New User
edited August 2023 in 2019 Archives
My laptop has the “Default Boot Device Missing or Boot Failed” text pop up every time it boots up. I looked up videos of how to fix it but they don’t work. So I was wondering how do I fix it?

Answers

  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    edited October 2019
    KyleIsWeird

    Hi,

    I am really sorry for the inconvenience.   First of all we need to try the power drain test and Bios defaults before proceeding further. 

    These are the basic steps that you need to follow.

    Power Drain test for laptop.

    If your computer is not having the inbuilt battery follow these steps.

    1.  Turn off the laptop.  Unplug all the cables and devices including power cable.

    2.  Remove the battery if it is not inbuilt.

    3.  Hold the power button for 50 seconds.

    4.  Connect all the cables back

    5.  Turn on the computer.

    Steps to remove the battery.

    1.  Turn off the computer.   Remove all the cables and devices including power cable

    2.  Turn the laptop upside down.  Flip the laptop.  On the back of laptop there will be a unlock switch.  You need to move the switch to the left or right and then you need to pull the battery door out.  

    If your computer is having an inbuilt battery follow these steps.

    Power Drain test.

    1.  Turn off the laptop.  Unplug all the cables and devices including power cable.

    Flip the laptop.  On the back of the laptop there will be a tiny hole.  It is called a battery reset hole.  There will be a battery symbol right next to the hole.

    2. You need to insert a paper clip or small pin gently inside the hole and hold it for    30 seconds. 

    3. Plug all the cables back and turn on the computer.

    Step 2

    Bios Defaults.

    1. Turn on the computer and keep on tapping f2.  It will go to bios setup utility

    2. Press f9 once on the bios setup screen.   It will show you bios defaults.  Please press yes.

    3. Press f10 on the bios setup screen.  It will show you "yes" to save the changes.  Please press yes.

    Computer will automatically restart and it will load windows..


    If the above steps are helpful for you please click "like"

    If the above steps resolves your issue please click "yes"

     



    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★