Excess heating after clean install of windows Helios 300 2019

ManikantsahuManikantsahu Member Posts: 3 New User
edited October 2019 in Predator Laptops
So i got my laptop a few days ago. It's Helios 300 2019 i7 9th Gen with 1660 to and i decided to clean install win 10 from official ISO file because the laptop was using 55-60% ram on ideal mode and everything went down and i installed every latest driver and even updated my bios but after that when i played games like shadow of war and far cry 5 at ultra the cpu temp rose to 92 and the GPU was around 85 which previously was 85 for cpu and 80 for GPU. So have i not configured something or the undervolting on my cpu is gone..

FAQ & Answers

  • christy1christy1 Ally Posts: 646
    Hi @Manikantsahu,

    Relax . check the blog below, also check the 1st and 2nd page in it. Try using cooling pad. good luck. 
    https://community.acer.com/en/discussion/545316/acer-nitro-5-overheating/p2
    Hit Accept if its Helpful.   B)
  • sri369sri369 ACE Posts: 1,982 Pathfinder
    edited October 2019
    So i got my laptop a few days ago. It's Helios 300 2019 i7 9th Gen with 1660 to and i decided to clean install win 10 from official ISO file because the laptop was using 55-60% ram on ideal mode and everything went down and i installed every latest driver and even updated my bios but after that when i played games like shadow of war and far cry 5 at ultra the cpu temp rose to 92 and the GPU was around 85 which previously was 85 for cpu and 80 for GPU. So have i not configured something or the undervolting on my cpu is gone..
    If you installed 1903 (or even 1809 for that matter), it tends to push your CPU to high performance mode. Try changing your power plan to help with this.

    I have attached my power plan for you to use... see if this helps.

    1. Press Win+X and select Command Prompt (Admin) to open the elevated Command Prompt.
    2. Copy and paste the following command and hit Enter to export the power plan
    powercfg -import PowerPlanWin10Srinivas11oct2019.pow
    3. When it’s done, you will get the message, Imported Power Scheme Successfully.
    Select the power plan.
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve
    ---------
    I am not an Acer employee.
    Your issue could get better coverage and more answers if posted in forums than in a message to me.

    ---------
    User benchmark: https://www.userbenchmark.com/UserRun/30914801



  • ManikantsahuManikantsahu Member Posts: 3 New User
    Thanks .. will try. And yes the windows was updated from 1803 to 1903 latest
  • ManikantsahuManikantsahu Member Posts: 3 New User
    I don't know what happened but my thermals are back to normal perfectly as it was before.thanks all of you anyway..🥰🥰🥰
  • christy1christy1 Ally Posts: 646
    I don't know what happened but my thermals are back to normal perfectly as it was before.thanks all of you anyway..🥰🥰🥰
    Welcome my friend. 
    Hit Accept if its Helpful.   B)
Sign In or Register to comment.

Who's Online1.1K

akhilmathew
akhilmathew
aphanic
aphanic
arturolemos
arturolemos
Jangos
Jangos
JosDeVries
JosDeVries
KVV
KVV
Nathanviel
Nathanviel
Ravikumarrak57
Ravikumarrak57
Reznorio
Reznorio
Robertoherrera1
Robertoherrera1
YCL
YCL
+1.1K Guests

Join in, share your experience!

It looks like you're new here. If you want to get involved, click one of these buttons!

Assistance by Acer


Drivers &
Manuals

Acer
Answers

Get Product Information
( only)

Acer Support
Videos