Acer Aspire E5-576 - Cant get my SSD to work on 392h

94_snake
94_snake Member Posts: 11

Tinkerer

edited September 2023 in 2019 Archives
Just got the laptop, and immediately put more RAM in, and working on trying to install an SSD as a boot drive.  The laptop wont recognize the SSD once booted.  In the BIOS, it shows up on the Information tab, but not on the Boot tab.  Tried following the ACER youtube video, but no luck.  What am I missing?  Pretty much a noob, so sorry if its a simple fix.
Here is the SSD I bought:

Best Answer

  • StevenGen
    StevenGen ACE Posts: 12,507 Trailblazer
    Answer ✓

    "You can do this cloning with Acronis (that is recommended by Crucial) or AOMEI or Macrium Reflect

    How to clone HDD to M.2 SSD?

    After connecting your M.2 SSD to your computer, make sure it is recognized by your computer. If it is shown in Windows Disk Management, then you can follow the steps below to clone hard drive to M.2 SSD. 

    1. Download and run this freeware AOMEI Backupper.

    2. At the Home screen, click on “Clone” and then select “Disk Clone”. If you prefer to clone only OS, you can select “System Clone”. It’s the advanced feature in AOMEI Backupper Pro edition.

    3. Select the original hard drive as source disk and select the M.2 SSD as the destination disk successively.
    4. Tick "SSD Alignment" to accelerate the reading and writting speed of the destination SSD. Click “Start Clone” to start the clone.
    If you prefer to clone via bootable USB disk, the process is the same after you boot from the bootable disk created by AOMEI Backupper. As you can see, besides the ability to clone HDD to M.2 SSD, it also allows you to backup hard drive or restore it when need be.

Answers

  • Deejay_tech
    Deejay_tech Member Posts: 356 Seasoned Practitioner WiFi Icon
    !) The SSD should have GPT partition.
    2) it should be bootable.
    3) it should have operating system on it.

    only then it would be shown as bootable in bios.

    what shows in the boot menu ? when you press F12 key and power on.
    My personal Acer m/c's
    1) Gaming: Acer Predator Helios 300 PH315-51
    Config:Core i5 8300H, 16GB, 250GB SSD, 1TB HDD, 1050ti GPU

    2) Daily Use: Acer Aspire A315-53  59GR
    Config: Core i5 8250u, 8GB, 256 SSD, 1TB HDD, IPS FHD 

    3) Linux Learning: Acer Aspire A315-53 P4MY
    Config: Pentium Gold 4417U, 8 GB, 256 SSD, 500GB HDD.
  • 94_snake
    94_snake Member Posts: 11

    Tinkerer

    edited August 2019
    I have copied all the contents of the 1TB main drive over to the SSD via a clone.  Removed the main drive, and go in to Bios, and it still doesnt show. 

    1) I have made it GPT
    2) Not sure how to do that. 
    3) It does as far as I know by doing the clone.

    Do I press F12 after I get in to BIOS and on the boot tab?

    Sorry, stupid questions, I know.  But thanks for the help.
  • When you cloned, did you also clone 100mb partitions and erecovery? Also, have you ever checked if the disk is online in windows disk manager?
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • 94_snake
    94_snake Member Posts: 11

    Tinkerer

    I did not close the 100mb patitions and recovery, just the C drive. Should I have? I have checked the manager, and it does show up.
  • StevenGen
    StevenGen ACE Posts: 12,507 Trailblazer
    Answer ✓

    "You can do this cloning with Acronis (that is recommended by Crucial) or AOMEI or Macrium Reflect

    How to clone HDD to M.2 SSD?

    After connecting your M.2 SSD to your computer, make sure it is recognized by your computer. If it is shown in Windows Disk Management, then you can follow the steps below to clone hard drive to M.2 SSD. 

    1. Download and run this freeware AOMEI Backupper.

    2. At the Home screen, click on “Clone” and then select “Disk Clone”. If you prefer to clone only OS, you can select “System Clone”. It’s the advanced feature in AOMEI Backupper Pro edition.

    3. Select the original hard drive as source disk and select the M.2 SSD as the destination disk successively.
    4. Tick "SSD Alignment" to accelerate the reading and writting speed of the destination SSD. Click “Start Clone” to start the clone.
    If you prefer to clone via bootable USB disk, the process is the same after you boot from the bootable disk created by AOMEI Backupper. As you can see, besides the ability to clone HDD to M.2 SSD, it also allows you to backup hard drive or restore it when need be.
  • I did not close the 100mb patitions and recovery, just the C drive. Should I have? I have checked the manager, and it does show up.

    Yes, it is necessary to clone all partitions.
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • 94_snake
    94_snake Member Posts: 11

    Tinkerer

    StevenGen said:

    "You can do this cloning with Acronis (that is recommended by Crucial) or AOMEI or Macrium Reflect

    How to clone HDD to M.2 SSD?

    After connecting your M.2 SSD to your computer, make sure it is recognized by your computer. If it is shown in Windows Disk Management, then you can follow the steps below to clone hard drive to M.2 SSD. 

    1. Download and run this freeware AOMEI Backupper.

    2. At the Home screen, click on “Clone” and then select “Disk Clone”. If you prefer to clone only OS, you can select “System Clone”. It’s the advanced feature in AOMEI Backupper Pro edition.

    3. Select the original hard drive as source disk and select the M.2 SSD as the destination disk successively.
    4. Tick "SSD Alignment" to accelerate the reading and writting speed of the destination SSD. Click “Start Clone” to start the clone.
    If you prefer to clone via bootable USB disk, the process is the same after you boot from the bootable disk created by AOMEI Backupper. As you can see, besides the ability to clone HDD to M.2 SSD, it also allows you to backup hard drive or restore it when need be.
    I was able to get it to finally work with AOMEI.  Acronis wouldnt work, but AOMEI did for whatever reason.  Thanks for all the help guys, I appreciate it!