SATA and Power Cables available in Aspire TC-885 to add a 1 TB HD Drive? and..Swap out to 1 TB SSD?

MarkV
MarkV Member Posts: 1 New User
edited March 1 in 2019 Archives
Here is the model info: https://www.acer.com/ac/en/US/content/model/DT.BAPAA.028
1. I would like to add a 1 TB HD drive to this model. Not sure if there are any SATA connectors and extra Power connectors to add this?
2. I would like to swap-out the 512GB SSD to a 1 TB. I see there is one PCI 16 slot I could add it to, but wonder if the original 512GB can be swapped?

Answers

  • billsey
    billsey ACE Posts: 33,980 Trailblazer
    edited August 2019
    You have the SATA jack on the motherboard and a SATA power connector on the PSU, but it won't have the SATA cable or mounting screws for the HDD. Your existing SSD is in an M.2 slot, but I'm not completely positive your M.2 supports NVMe drives (I think all the 9th gen SKUs do, but not positive). You could look at the existing SSD (it's under the drive bays IIRC) to verify it's an NVMe before ordering the 1TB version.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.