No Bootable Device aspire e5-474G

Aiman07
Aiman07 Member Posts: 1 New User
edited September 2023 in 2019 Archives
Hi guys can you help me out. Actually I press the F2 button and F9 and reboot it up. Now it doesn’t work. So, I’m just set default on HDD and reboot it up and it’s says “Preparing Automatic Repair” and it becomes black screen. what I’m doing is right or not?? help me out guys I really needed. BTW I’m using aspire e5-474G. Thanks

Answers

  • MartinJohn00001
    MartinJohn00001 Member Posts: 636 Seasoned Specialist WiFi Icon
    @Aiman07
    Hi, try to do a System refresh and check. kindly follow the below steps.

    1)Press and hold the Power key for 5 seconds to power the system off completely and unplug all the cables.
    2)Press and hold down the Alt key,press the Power key to turn on the computer.Immediately start tapping the F10 key while you are still holding down the Alt key.
    3)Your system should boot to a blue screen that says Choose an option.
    4)Select Troubleshoot.
    5)Click Reset your PC.
    6)Click Next, then select Keep My Files.
    7)Click Reset to begin the recovery.

       If doing System Refresh doesn't work, try to do System Reset which will bring the computer to default settings. Follow the below steps to do a Reset.

    Reset PC using Alt + F10:
    *****************************
    1)Press and hold the Power key for 5 seconds to power the system off completely and unplug all the cables.
    2)Press and hold down the Alt key,press the Power key to turn on the computer.Immediately start tapping the F10 key while you are still holding down the Alt key.
    3)Your system should boot to a blue screen that says Choose an option.
    4)Select Troubleshoot.
    5)Click Reset your PC. This process will erase all data on the your system. 
    6)Click Next, then select Just remove my files.
    7)Click Reset to begin the recovery.

    Kindly click "YES" to "Did this answer the question" if my answer helped you!      
    Thank you and have a Blessed Day  :3