Acer Predator Helios 300(PH-315 52) Re-paste Help

Davoncci

Hello, is there a detailed guide in repasting this laptop? Will it make a difference? The laptop doesn't run too hot bTW. Just looking for lower temps as I would be traveling to Nigeria soon which is pretty hot.

belik

Yes after LM your cpu temp must reduce by ten degrees both in auto and turbo

xapim

Davoncci if you are looking into repasting it i recommend kryonaut or similar check my signature there is a brand new video on Hotel Hero youtube channel that he made about repasting i also recommend the spread method by just covering both diodes with juts a thin layer its enough bare in mind too much paste its not good neither too less it has to be just the exact amount i have dropped down 25+ after optimizing windows/undervolting and repasting with kryonaut the first week i got it also upgraded everything at the same time

Davoncci

xapim said:

Davoncci if you are looking into repasting it i recommend kryonaut or similar check my signature there is a brand new video on Hotel Hero youtube channel that he made about repasting i also recommend the spread method by just covering both diodes with juts a thin layer its enough bare in mind too much paste its not good neither too less it has to be just the exact amount i have dropped down 25+ after optimizing windows/undervolting and repasting with kryonaut the first week i got it also upgraded everything at the same time

Interesting! Thanks for your answer. About the under-volt, did you further under-volt the laptop because it comes undervolted out of the box? I tried doing that, but it became unstable. What voltage did you use for the Core voltage and also the cache voltage? I was able to under-volt core temp alone to -0.169v while the cache voltage, I couldn't push past -0.125v( which is the default under-volt). Can the core voltage differ from cache voltage?

Secondly, how did you optimize windows?

Thanks in anticipation.

Davoncci

belik said:

Yes after LM your cpu temp must reduce by ten degrees both in auto and turbo

Thanks for your answer. I am so scared of that LM. I will rather use Kryonaut and be safe.

XdxD

Davoncci said:

xapim said:

Davoncci if you are looking into repasting it i recommend kryonaut or similar check my signature there is a brand new video on Hotel Hero youtube channel that he made about repasting i also recommend the spread method by just covering both diodes with juts a thin layer its enough bare in mind too much paste its not good neither too less it has to be just the exact amount i have dropped down 25+ after optimizing windows/undervolting and repasting with kryonaut the first week i got it also upgraded everything at the same time

Interesting! Thanks for your answer. About the under-volt, did you further under-volt the laptop because it comes undervolted out of the box? I tried doing that, but it became unstable. What voltage did you use for the Core voltage and also the cache voltage? I was able to under-volt core temp alone to -0.169v while the cache voltage, I couldn't push past -0.125v( which is the default under-volt). Can the core voltage differ from cache voltage?

Secondly, how did you optimize windows?

Thanks in anticipation.

His and mine (both have G3-572 from 2017) don't come pre-undervolted from the factory.