Laptop won't start.(AN515-53-52FA.)

Robrono

I have owned this Nitro laptop since November 2018, and it's model number is AN515-53-52FA. When I try and press turn on the laptop by pressing the power button the keyboard backlight will turn on for approximately two seconds and then turn off. The screen remains black during the entire process. I have attempted to do the batter trick, both via pressing the power button for thirty seconds, and using the small battery hole in the back of the laptop, holding that for five seconds, and when that did not work I tried it for thirty seconds. after each attempt I waited 5 minutes before checking to see if it worked. When I try and charge the laptop, the charge light will come on, so the laptop will still charge and recognizes the charger. I am unsure what the issue might be. If anyone has any other solutions I can try before resorting to a local tech shop I would be extremely grateful.

Du_little

Robrono said:

I have owned this Nitro laptop since November 2018, and it's model number is AN515-53-52FA. When I try and press turn on the laptop by pressing the power button the keyboard backlight will turn on for approximately two seconds and then turn off. The screen remains black during the entire process. I have attempted to do the batter trick, both via pressing the power button for thirty seconds, and using the small battery hole in the back of the laptop, holding that for five seconds, and when that did not work I tried it for thirty seconds. after each attempt I waited 5 minutes before checking to see if it worked. When I try and charge the laptop, the charge light will come on, so the laptop will still charge and recognizes the charger. I am unsure what the issue might be. If anyone has any other solutions I can try before resorting to a local tech shop I would be extremely grateful.

Hi ,
Try booting your computer into bios and check whether your able to see the display
Follow the below steps,

1. Restart your computer. Open Start. ...
2. Wait for the computer's first startup screen to appear. ...
3. Repeatedly tap Del or F2 to enter setup. ...
4. Wait for your BIOS to load. ...
5. Find the "Setup Defaults" option. ...
6. Select the "Load Setup Defaults" option and press ↵ Enter . ...
7. Save your changes and confirm your selection if necessary.