How to configure BIOS for a Nitro 5 with 1TB HDD and GTX1050 with Samsung 970 Evo Plus NVMe M.2 ?

BIOS_curious
BIOS_curious Member Posts: 1 New User
edited November 2023 in 2019 Archives
How do I configure the BIOS for a Nitro 5 with 1TB HDD and GTX1050 with Samsung 970 Evo Plus NVMe M.2 added? The default SATA setting is for RST with  Optane. I would think that the SSD would require AHCI, but the system will not boot in that mode. I also noted that Acronis list the 1TB original drive as a RAID drive. What can I do to take full advantage of the SSD? I used Macrium to clone the HDD to the SSD. No issues. Does the HDD need to be reformatted?

Best Answer

  • Kye2000
    Kye2000 Member Posts: 2 New User
    Answer ✓
    Boot into safe mode then reboot to bios , change to AHCI. I did the exact same

Answers

  • Kye2000
    Kye2000 Member Posts: 2 New User
    Answer ✓
    Boot into safe mode then reboot to bios , change to AHCI. I did the exact same
  • Onkeey
    Onkeey Member Posts: 2 New User
    Can you specify your model number