AC LED problem ph517-61

Lukasz369ns
Lukasz369ns Member Posts: 5 New User
edited November 2023 in 2019 Archives
Hi,
I have a problem with AC led. After upgrade BIOS from 1.06 to 1.08 my ac led always on. When I turn off my predator it is still lit orange.
What can I do with it?

Best Answer

  • Jack22
    Jack22 ACE Posts: 4,170 Pathfinder
    Answer ✓
    @Lukasz369ns
    Try the below step and check once:
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. 
    now put a paper clip in the small pin hole and press and hold it for 40 sec.

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!

Answers

  • Jack22
    Jack22 ACE Posts: 4,170 Pathfinder
    Answer ✓
    @Lukasz369ns
    Try the below step and check once:
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. 
    now put a paper clip in the small pin hole and press and hold it for 40 sec.

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • Lukasz369ns
    Lukasz369ns Member Posts: 5 New User
    Is it safe?
  • Jack22
    Jack22 ACE Posts: 4,170 Pathfinder
    @Lukasz369ns
    Yes, its safe. Thats nothing but draining the static energy present on the unit. Try and check

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • Lukasz369ns
    Lukasz369ns Member Posts: 5 New User
    It doesn't work :( I tried the needle and paper clip. But when I close or open screen the led is off for the 2 seceonds and turn on again.
  • Jack22
    Jack22 ACE Posts: 4,170 Pathfinder
    It doesn't work :( I tried the needle and paper clip. But when I close or open screen the led is off for the 2 second and turn on again.
    Check whether when you press and hold the paper clip on the unit do you hear a click sound or do you fell like pressing any button inside? 
    Click on 'Yes' if the comment answers your question!
  • Lukasz369ns
    Lukasz369ns Member Posts: 5 New User
    I can't hear anything but I think there are some metal parts in it.
  • Lukasz369ns
    Lukasz369ns Member Posts: 5 New User
    I left the laptop all night with the charger in the pin and stopped shining. Nice. Thanks for your reply.