could anyone help me with solving this issue with my Acer Iconia tablet A501

jscmenon
jscmenon Member Posts: 6 New User
edited March 18 in 2019 Archives
My Acer Iconia tablet A501 is not booting up it was working perfectly fine one day and the next day in the morning when turned on, the android robot tried booting but failed and lay belly up with red exclamation mark on it. 
from then on, i cannot start the tablet. each time i turn the power on, it stays on the acer logo for ages and nothing happening.
Could any one of you please help me solve this issue?
Thank you in advance
S Menon

Answers

  • Jack22
    Jack22 ACE Posts: 4,017 Pathfinder
    @jscmenon
    Try Hard reset:
    • Power off the tablet
    • Hold Volume up + Power on the tablet 
    • Then switch Lock On/Off (Green) back and forth while holding Volume up
    • Wait about 20 seconds for Android to start
    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • jscmenon
    jscmenon Member Posts: 6 New User
    Thank you Jack for answering my query but it did not work. I request if any one else could help me solve this issue.
    when I power on, the tablet A510 is stuck on acer logo.
    please help
    Thanks in advance
  • HellActive
    HellActive Member Posts: 4 New User
    i think it hard brick did you try to install Stock Firmware
  • billsey
    billsey ACE Posts: 33,980 Trailblazer
    You can get those symptoms, especially on an older model like your, if the flash storage has failed. Typically part of the failure mode is for the existing data to become corrupted, and resets don't fix it because the new image is also corrupted. :(
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • jscmenon
    jscmenon Member Posts: 6 New User
    i think it hard brick did you try to install Stock Firmware

  • jscmenon
    jscmenon Member Posts: 6 New User
    Thanks for responding to my query. No i have not installed stock firmware. What would that do??
  • jscmenon
    jscmenon Member Posts: 6 New User
    billsey said:
    You can get those symptoms, especially on an older model like your, if the flash storage has failed. Typically part of the failure mode is for the existing data to become corrupted, and resets don't fix it because the new image is also corrupted. :(

  • jscmenon
    jscmenon Member Posts: 6 New User
    Thank you for responding to my query.
    request if anyone else can help me with a solution.