Can't complete clean Win10 Installation Nitro 5 AN515-53-52FA error code 0x8007025D
Hangs during install says Windows canot install required files. Make sure all files required for installation are available and restart the installation.
I've tried a number of things including attempting to install in ACHI mode, turned off secure boot. The HDD - original and now a new 250GB WD both hang at the same place. It copies the files, gets to preparing files for installation and at 48% stops with this message. I click OK, wait, and after a moment, BSOD with "memory management" I've loaded the drivers "Intel Chipset SATA/PCIe RST Premium Controller (iastorAC.inf), Intel Pinning Shell Extensions (iaStorSW.inf) and Intel RST Software components Extension (iaStorSwExt.inf) at the setup screen (odd that the first fail only showed the Ext.inf and AC.inf the first time after I wipe the drive out and start over then the second time through the Pinning Shell Extensions shows up in the same driver load list the second time after failing).
I've never been at this much of a loss. This started with odd losses of data on the HDD and a surface scan showed over 55k bad sectors at 1% scanning which drove me to go buy a new 250GB western digital SSD but I put it in and I get the same error at the same point while trying to install Win 10 from a USB drive. Both created the media normally and also by making an ISO and writing it to the USB using RUFUS and neither works even after installing these drivers.
I've never been stuck like this. It's just bizarre.
