Hi, I have Acer Switch 3 SW312 and want to boot through PXE network boot.

Kaxim
Kaxim Member Posts: 2 New User
edited November 2023 in 2019 Archives
Hi, I have Acer Switch 3 SW312 and want to boot through PXE network boot.

Answers

  • billsey
    billsey ACE Posts: 34,944 Trailblazer
    edited March 2019
    IIRC those models don't have ethernet ports on board. PXE uses the hardware to load data before the typical TCP/IP protocols aren running. I don't think there is going to be any way to use PXE booting over the wireless.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Kaxim
    Kaxim Member Posts: 2 New User
    I bought the USB Network adopter. Do we make some changes in BIOS?
  • billsey
    billsey ACE Posts: 34,944 Trailblazer
    No, the BIOS isn't going to know anything about the network adapter, so it won't be usable for a PXE boot. The might be some minimalist boot disk like I've seen for booting from CD on old machines that only booted from FDD or HDD, but it would likely have to come from the adapter manufacturer, or at least the manufacturer of the chips inside the adapter.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.