I have nvme wd black 1tb and i make clone very well but when i install it my laptop doesnot work why

Gold1406

egydiocoelho

Could you better specify the problem? Did you change the boot order in bios? What is your notebook model? Example v3-571-6682!

IVAN_PC

Hi.

What software was used to make the cloning? make sure you have cloned the reserved partition of the system in addition to the system partition (drive C , configured the cloned disk as the first boot drive, both the source disk and the destination disk are the same MBR or GPT disk . If not, you must convert MBR disk to GPT or in reverse.

Regards.

Gold1406

egydiocoelho said:

Could you better specify the problem? Did you change the boot order in bios? What is your notebook model? Example v3-571-6682!

I install the nvme but when i push the power no power like battery damage I scare to connect to adapter directly 

Gold1406

IVAN_PC said:

Hi.

What software was used to make the cloning? make sure you have cloned the reserved partition of the system in addition to the system partition (drive C , configured the cloned disk as the first boot drive, both the source disk and the destination disk are the same MBR or GPT disk . If not, you must convert MBR disk to GPT or in reverse.

Regards.

Problem when i push the power is not working if I replace to old storage laptop is run no problem 
please any one read the comments help me 

egydiocoelho

OK! Can you tell us the exact model of your notebook? Example an515-51-75kz! Have you tried connecting ssd to the other slot? Generally, when notebooks have two m2 slots, only one of the slots accepts nvme!

Gold1406

egydiocoelho said:

OK! Can you tell us the exact model of your notebook? Example an515-51-75kz! Have you tried connecting ssd to the other slot? Generally, when notebooks have two m2 slots, only one of the slots accepts nvme!

G9-593-76pf

IVAN_PC

Gold1406 dijo:

IVAN_PC said:

Hi.

What software was used to make the cloning? make sure you have cloned the reserved partition of the system in addition to the system partition (drive C , configured the cloned disk as the first boot drive, both the source disk and the destination disk are the same MBR or GPT disk . If not, you must convert MBR disk to GPT or in reverse.

Regards.

Problem when i push the power is not working if I replace to old storage laptop is run no problem 
please any one read the comments help me 

In this we are helping you, but can you leave us the model of your team? .. To know what is compatible, if sata or Pcie, since Nvme is the memory carried by PCIe.

Regards.

IVAN_PC

Gold1406 dijo:

egydiocoelho said:

Could you better specify the problem? Did you change the boot order in bios? What is your notebook model? Example v3-571-6682!

I install the nvme but when i push the power no power like battery damage I scare to connect to adapter directly 

Accept both, the one you are installing is compatible, when you connect it to the socket, you do it only with this one, that is to say with the m2 and not in a dual way with the hdd.

Disconnect the HDD and configure the bios to start from the ssd m2?

Gold1406

IVAN_PC said:

Gold1406 dijo:

egydiocoelho said:

Could you better specify the problem? Did you change the boot order in bios? What is your notebook model? Example v3-571-6682!

I install the nvme but when i push the power no power like battery damage I scare to connect to adapter directly 

Accept both, the one you are installing is compatible, when you connect it to the socket, you do it only with this one, that is to say with the m2 and not in a dual way with the hdd.

Disconnect the HDD and configure the bios to start from the ssd m2?

I will trying now

IVAN_PC

Ok, we are attentive.

Gold1406

IVAN_PC said:

Ok, we are attentive.

I tried like you say but still same problem 
anyone help me please

egydiocoelho

Here's how only storage 1 is compatible with nvme, see: 

Storage 1: M.2 2280 SATA Gen3x2 or PCIe x4 Gen3 for SSD

Storage 2: Optional : M.2 2280 *1 (SATA Express) for SSD

Storage 3: HDD : 9.5 / 7.2 / 7mm co-lay

128GB/256GB/512GB SSD

Have you tried connecting ssd to the other slot?

Gold1406

egydiocoelho said:

Here's how only storage 1 is compatible with nvme, see: 

Storage 1: M.2 2280 SATA Gen3x2 or PCIe x4 Gen3 for SSD

Storage 2: Optional : M.2 2280 *1 (SATA Express) for SSD

Storage 3: HDD : 9.5 / 7.2 / 7mm co-lay

128GB/256GB/512GB SSD

Have you tried connecting ssd to the other slot?

I have 2 slot and i tried both first and second every time i used slot only put nvme but doesnot work
problem with power when i install nvme if i remove it its run very well 

egydiocoelho

Have you tried changing the bootmode to legacy on bios and then connect to ssd? What is the exact model of ssd?

Gold1406

egydiocoelho said:

Have you tried changing the bootmode to legacy on bios and then connect to ssd? What is the exact model of ssd?

I tried it but still problem

egydiocoelho

Let's start again okay!

First tell the exact model of your ssd and make sure it is identified in the information section of bios! If correctly identified, you need to clone all boot partitions that are on hd. Here's an example of mine here:

Red-Sand

May sound silly..
But are you reinstalling the bottom panel after switching the M.2 SSD?
There is a safety switch that wont let the laptop power on if the bottom isn't reinstalled.

egydiocoelho

If you are trying to install ssd with the enclosure open, the notebook will not turn on as this button will not be pressed, see: