Acer Nitro N50-600EB14 - How To Remove Optical Drive Bay and PSU?

david_eeee

Hi, was looking to upgrade the n50-600's GTX 1060 to a 1070ti. 

However, in order to do that, I first need to swap the 500W liteon PSU for a better PSU. I've been able to take out the 4 pin connector for the CPU, the peripheral cables for the hard drive, and the 6 pin connector for the 1060. However, I still need to remove the 24 pin connector on the motherboard in order to take out the 500w PSU and swap it. Unfortunately, the Optical Disk Drive Bay is in the way of the 24pin connector. 

Note that I've already taken out the **Optical Disk Drive Reader**, the part that actually reads the disk itself, out of the case by pressing the latch on the back, inside the case. However, the **Optical Disk Drive BAY** is still inside. I can't figure out for the life of me how to take out the bay itself. Is there any help anyone can give me on this? Or is there an n50-600 manual floating around somewhere? The 24 pin connector is so close

Sharanji

david_eeee 
Please check if the below images.




Hit 'Like' if you find the answer helpful!   
Click on 'Yes' if the comment answers your question!