The touchpad and keyboard do not turn on after you turn the acer spin display ACER SPIN 1 SP111-32N)

Options
Donoter
Donoter Member Posts: 2 New User
edited November 2023 in 2019 Archives
After turning the display into laptop mode, I do not turn on the touchpad and keyboard. After reboot everything works. What to do?

My laptop: ACER SPIN 1 SP111-32N. Help)))

Answers

  • Jack22
    Jack22 ACE Posts: 3,770 Pathfinder
    Options
    @Donoter
    Try these steps:
    1.Reset
    2.Press F2 to enter in BIOS
    3.Main
    4.Set touchpad as basic (NO ADVANCED) . All other should be set as enable in Main
    5.Press F10 to save changes I hope this sequence to solve your problems

    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • Donoter
    Donoter Member Posts: 2 New User
    Options
    Jack22 said:
    @Donoter
    Try these steps:
    1.Reset
    2.Press F2 to enter in BIOS
    3.Main
    4.Set touchpad as basic (NO ADVANCED) . All other should be set as enable in Main
    5.Press F10 to save changes I hope this sequence to solve your problems

    Click on 'Yes' if the comment answers your question!

    Don't working
  • xksiadz24
    xksiadz24 Member Posts: 15

    Tinkerer

    Options

    For me, the same problem. Has anyone found a solution ??
  • xksiadz24
    xksiadz24 Member Posts: 15

    Tinkerer

    Options

    can someone give their bosh accellometer version and when was it released?
  • JackE
    JackE ACE Posts: 44,593 Trailblazer
    Options
    xksiadz24

    Have you tried all the previous recommendations? Jack E/NJ

    Jack E/NJ

  • xksiadz24
    xksiadz24 Member Posts: 15

    Tinkerer

    Options
    yes. It did not do it
  • vinhvpham
    vinhvpham Member Posts: 2 New User
    Options
    for anyone else that needed the answer, I posted what worked for me in this thread:


  • gbelzile
    gbelzile Member Posts: 1 New User
    Options
    Had the same problem and fixed it that way :
    Device Manager, find Bosh Accelerometer. Right click and update drivers. I also had a few more drivers which weren't up to date but this one fixed the problem