Wifi connection problem predator G3-710

Yangyang
Yangyang Member Posts: 1 New User
edited November 2018 in Predator Desktops
I can’t connect my pc predator G3-710 to my wifi! I tried everything installing/uninstalling drivers, updated drivers, forgetting networks and all. It says no internet connection at all. I can see our wifi but I could not connect at all. Please help me solve this issue please 

Answers

  • Jack22
    Jack22 ACE Posts: 4,095 Pathfinder
    @Yangyang
    Just try one simple step and check

    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. now put a paper clip in the small pin hole and press and hold it for 30 sec.
    BIOS default: After power drain is done, power on the unit, but as soon as you power on the unit keep pressing the F2 key so that it take you to BIOS page. Press F9 and press Enter than press F10 and press Enter. the unit will restart

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • TsukuneYuda
    TsukuneYuda Member Posts: 1 New User
    I couldn't find the pin hole 
  • StevenGen
    StevenGen ACE Posts: 12,174 Trailblazer
    Your G3-710 has the Intel Dual Band Wireless-AC 7265 card or similar. Try and press F3 key or the F3 and Fn keys and see if it activates your WiFi/BT, this is a method to activate both WiFi and BT protocols! Otherwise take the card out and clean it and replace it and also see if the white/black arial wires are connected properly?  Try that first, as these cards very rarely go wrong. 
  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    Heheh, the pin hole is a laptop thing, to reset the battery. Your desktop doesn't have one. :)
    Most of the time it's just an error in putting the password in, if your system sees the SSID of your router it should be able to connect.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.