Acer swift 3 sf315-51 windows installation problem

Anishq
Anishq Member Posts: 35 Troubleshooter
edited November 2023 in 2018 Archives
Windows Bootable pendrive is not showing 

Answers

  • TECH_MAN
    TECH_MAN Ally Posts: 453
    Hi Anishq

    As soon as power on the unit Tap F2 key on your keyboard  it will enter into the BIOS page in it you can find the Following Options like Information, main, security and Boot 

     

     -You have to press F9 for load default settings in bios

     -enter into boot option - select Boot mode -legacy mode

    and select Boot priority order that is if your gonna install through USB pendriver you have to select "USB HDD"

    or if your gonna install internal CD drive you have to select "ATPI CD ROM"

    if your gonna install thouch external CD drive select "USB CD ROM"

    After selecting press F6 for bring into 1st prorority  once done 

    Press F10 key to save setting it will directly Boot 

     "Hit Like If its Helpful"


    Hit 'Like' if you find the answer helpful!
    Click on 'Yes' if the comment answers your question!
  • Anishq
    Anishq Member Posts: 35 Troubleshooter
    TECH_MAN said:
    Hi Anishq

    As soon as power on the unit Tap F2 key on your keyboard  it will enter into the BIOS page in it you can find the Following Options like Information, main, security and Boot 

     

     -You have to press F9 for load default settings in bios

     -enter into boot option - select Boot mode -legacy mode

    and select Boot priority order that is if your gonna install through USB pendriver you have to select "USB HDD"

    or if your gonna install internal CD drive you have to select "ATPI CD ROM"

    if your gonna install thouch external CD drive select "USB CD ROM"

    After selecting press F6 for bring into 1st prorority  once done 

    Press F10 key to save setting it will directly Boot 

     "Hit Like If its Helpful"


    Legacy mode is not available .only uefi
  • TECH_MAN
    TECH_MAN Ally Posts: 453
    Hi Anishq
    • USB device is plugged in
    • F2 to BIOS
    • Switch to "Boot" and set “FastBoot” to Disabled
    • Switch to "Security" and set "Secure Boot Control" to Disabled
    • F10 to save and exit and immediately press F2 to BIOS
    • Only then could I switch to "Boot" and set “Launch CSM” to Enabled
    • F10 to save and exit and immediately press F2 to BIOS
    • Now select a boot option. My USB option didn't say USB, it was just 
    • F10 to save and exit - booted right to USB and Tap F12 You get Boot Manger with USB Option 
    Hit 'Like' if you find the answer helpful!
    Click on 'Yes' if the comment answers your question!