Got a new M.2 and it's only reading at >50% of what it should, I think the BIOS is still in RAID0

Ultrasuperman
Ultrasuperman Member Posts: 53 Die Hard WiFi Icon
edited November 2023 in 2018 Archives
I have a predator g9-793 and it came with a 256gb raid0 setup but I got a new M.2 and it's only reading at 700mb/s not the 2.5gb it should. I tried to update the firmware of the card and it said it can't in raid so I think the bios is still set to raid but I don't see an option to remove it

Answers

  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    If you are using the 2nd m.2 port for your 256GB SSD, 700MB/S is basically what you should get, as the 2nd m.2 port is SATA interface and works at sata 3 speeds.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • Ultrasuperman
    Ultrasuperman Member Posts: 53 Die Hard WiFi Icon
    It's the bottom slot the M key

Categories