GX-785 Will not boot at all

Cromkiller1
Cromkiller1 Member Posts: 5 New User
edited February 29 in 2018 Archives
I recently bought a refurbished acer pc GX-785 - UR 16.. I started it up fine was working great for like 3 to 4 days. Then I went to update the drivers with windows through this System/Device manager and updated everything in there that would update restarted the pc and it will not boot at all. There is no acer screen no windows logo no beeping I have 1 8gb stick of ram removed it and the system did an endless beep until I turned it off. It starts for about 22 seconds before restarting and doing the process over again 22 seconds restart. No display no usb power nothing at all please help I can't even get into bios settings or uefi... 

Answers

  • Kamalika
    Kamalika Member Posts: 423 Specialist WiFi Icon
    Hi,
       Try doing a power drain.
    Remove all the cables from the CPU and press and hold the power button for 10 seconds. Then re-plug all the cables and try turning it on. This should work.

    If I answered your question, please mark my post "accept" to make it easier for others to find the answer!
  • Balatekie
    Balatekie ACE Posts: 1,353 Pioneer
    Hi, If the RAM slot is empty and desktop is powered on, unit will emit beep sound and that is expected behavior. To overcome this issue, insert the RAM and boot computer. Immediately after powering on the unit, tap DEL and it should load to BIOS. Do BIOS default by pressing F9 & Enter, F10 & Enter. Reboot unit. Hope this works. 

    Hit 'Like' if you find the answer helpful! :)
    Click on 'Yes' if the comment answers your question!
     :) If you think I've answered your question, please hit the Accept Answer:)