in Acer Aspire V5-471G laptop Bios Menu not opening.

Good Morning,

i have my acer aspire V5-471G laptop. i cant open Bios menu. here i mentioned what i tried.
1. Bios menu not open through F2,Del,F12 also i tried F10,F8 then Fn+F2 , Fn+f12 but same still it not opening.
2. i also removed Bios Cell and tried to open but same issue faced.
3. then i remove HDD and install windows 10 in its HDD after attaching in different PC . OS was install but when after reinstall HDD in my laptop its show "NO OPERATING SYSTEM ".

Kindly Request to give any solution for this issue.................

Thank You ,
Sandip Patel
+880-1708519992

Accepted answers

All comments

IronFly

No operating system depends if you re-installed windows using UEFI or Legacy and installing windows using another PC and switching HDD is not the best way to do it.

do this:

1) download a windows 10 iso using Microsof tool:

http://go.microsoft.com/fwlink/?LinkId=691209

select the proper windows 10 version (the same installed on your laptop) and choose to save it as iso file when prompted

2) download Rufus:

http://rufus.akeo.ie/?locale=en_US

plug your USB flash drive, run Rufus then:

select ISO image from the dropdown menu near "Create a bootable disk"

click on the little icon on the right and browse to the windows 10 downloaded iso file

as Partitions scheme select "GPT partition scheme for UEFI"

as File system select "FAT32"

click on Start

wait until it finish, then uplug your USB flash drive

3) backup all your personal data *

4) Reboot to BIOS, pressing F2 at boot, then press F9 to load default and F10 to save and exit

5) plug your USB flash drive and at boot press F12 (if F12 doesn't work, see if it auto-recognise the USB flash drive or press F2 to enter BIOS and enable F12 boot menu under BOOT tab), choose the USB flash drive as bootable device

6) once at language/keyboard selection, press shift+F10, a command prompt will open

7) type

Diskpart

list disk

select disk x (x is the number of your HDD)

clean

convert GPT

exit

exit again to close command prompt

8) proceed with windows 10 installation

isdpatel

IronFly said:

No operating system depends if you re-installed windows using UEFI or Legacy and installing windows using another PC and switching HDD is not the best way to do it.

do this:
1) download a windows 10 iso using Microsof tool:
http://go.microsoft.com/fwlink/?LinkId=691209
select the proper windows 10 version (the same installed on your laptop) and choose to save it as iso file when prompted
2) download Rufus:
http://rufus.akeo.ie/?locale=en_US
plug your USB flash drive, run Rufus then:
select ISO image from the dropdown menu near "Create a bootable disk"
click on the little icon on the right and browse to the windows 10 downloaded iso file
as Partitions scheme select "GPT partition scheme for UEFI"
as File system select "FAT32"
click on Start
wait until it finish, then uplug your USB flash drive
3) backup all your personal data *
4) Reboot to BIOS, pressing F2 at boot, then press F9 to load default and F10 to save and exit
5) plug your USB flash drive and at boot press F12 (if F12 doesn't work, see if it auto-recognise the USB flash drive or press F2 to enter BIOS and enable F12 boot menu under BOOT tab), choose the USB flash drive as bootable device
6) once at language/keyboard selection, press shift+F10, a command prompt will open
7) type
Diskpart
list disk
select disk x (x is the number of your HDD)
clean
convert GPT
exit
exit again to close command prompt
8) proceed with windows 10 installation

Thank You For Solution but My problem is BIOS not Opening . and i am using RUFUS to installing any os from usb.

do you know about bios menu not opening issue?

IronFly

UEFI can lockup sometimes and the only way to enter it, is using windows 10 boot options.
http://gateway-us.custhelp.com/app/answers/detail/a_id/37064/~/windows-10:-access-the-uefi-bios

if it will not open...something went wrong and you need to contact Acer support service.

Azizan

isdpatel said:

Good Morning,

i have my acer aspire V5-471G laptop. i cant open Bios menu. here i mentioned what i tried.
1. Bios menu not open through F2,Del,F12 also i tried F10,F8 then Fn+F2 , Fn+f12 but same still it not opening.
2. i also removed Bios Cell and tried to open but same issue faced.
3. then i remove HDD and install windows 10 in its HDD after attaching in different PC . OS was install but when after reinstall HDD in my laptop its show "NO OPERATING SYSTEM ".

Kindly Request to give any solution for this issue.................

Thank You ,
Sandip Patel
+880-1708519992