A required CD/DVD drive device driver is missing problem

dadoo1997
dadoo1997 Member Posts: 1 New User
edited December 2017 in Aspire Laptops
Hi
i recently bought Acer a515-51g (i7-8550u)
i try to install windows 7 on it by a flash drive and when i finally was able to run it after pressing install now i had this error "A required CD/DVD drive device driver is missing etc"
i understand the problem is because during the installation the device doesnt read usb drives so i have no idea how to make it read or solve it anyway!
plz if anyone tells how to fix it id be appriciated.

Best Answer

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    windows 7 is missing chipset/SATA/AHCI drivers and isn ot officially supported neither by Acer or Intel.
    I'm not an Acer employee.

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    windows 7 is missing chipset/SATA/AHCI drivers and isn ot officially supported neither by Acer or Intel.
    I'm not an Acer employee.
  • Nonick_
    Nonick_ Member Posts: 20 Troubleshooter
    You need to integrate usb3/sata/ahci drivers in your windows 7 installation. Almost the easiest solution is this:
    Create Windows7 USB stick > (remove blank space between http: and //)
    1. download/prepare your windows 7 ISO file
    2. download and extract WindowsImageTool http: //download.gigabyte.eu/FileList/Utility/embedded_utility_windows_image_tool.zip 
    3. download and install VirtualCloneDrive https: //www.elby.ch/en/products/vcd.html
    4. mount your windows7 ISO file in VirtualCloneDrive
    5. run extracted WindowsImageTool.exe, select Windows 7 from the virtual drive as source, select USB stick as target, check options: integrate USB3 drivers, NVme drivers, Windows packages
    6. wait untill WindowsImageTool is finished and use created Windows7 USB stick to install Windows.
  • JackE
    JackE ACE Posts: 44,869 Trailblazer
    Hey, Nonick,  sounds like you've done this kind of upgrade before. 8^) Jack E/NJ

    Jack E/NJ

  • da_someone
    da_someone Member Posts: 12 New User
    Is it even possible to mod the drivers? And which exact ones are required to get through the installation? People are able to install Windows 7 on PC's with an 11th gen intel cpu, an rtx 3090 and it's working just fine for them, so I don't understand why it doesn't even install on an 8th gen CPU...
  • JackE
    JackE ACE Posts: 44,869 Trailblazer

    Yes it's possible to natively install Win7 if the UEFI bootstrap firmware has the legacy BIOS compatibility support module (CSM) installed for booting from an MBR partitioned drive AND SATA drive mode can be changed to AHCI. Win7 can also be installed as a virtual guest under UEFI bootstrapped operating systems like Win10 or Mint20.

    Jack E/NJ